Author: jsuijs
Date: Mon Dec 22 10:57:44 2008
New Revision: 638
Modified:
trunk/unvalidated/sample/test/board/board_16f88_js.jal
Log:
changed board file of 16f88 to use internal oscillator at 8 MHz
Modified: trunk/unvalidated/sample/test/board/board_16f88_js.jal
==============================================================================
--- trunk/unvalidated/sample/test/board/board_16f88_js.jal (original)
+++ trunk/unvalidated/sample/test/board/board_16f88_js.jal Mon Dec 22
10:57:44 2008
@@ -43,14 +43,24 @@
-- chip setup
include 16f88
+;--
+;-- This setup assumes a 20 MHz resonator or crystal
+;-- is connected to pins OSC1 and OSC2.
+;pragma target OSC HS -- HS crystal or resonator
+;pragma target clock 20_000_000 -- oscillator frequency
+;pragma target WDT disabled -- no watchdog
+;pragma target LVP disabled -- no low-voltage programming
+;pragma target CCP1MUX RB3 -- ccp1 pin on B3
+
--
--- This program assumes a 20 MHz resonator or crystal
--- is connected to pins OSC1 and OSC2.
-pragma target OSC HS -- HS crystal or resonator
-pragma target clock 20_000_000 -- oscillator frequency
-pragma target WDT disabled -- no watchdog
-pragma target LVP disabled -- no low-voltage programming
-pragma target CCP1MUX RB3 -- ccp1 pin on B3
+-- This setup uses the internal oscillator
+pragma target OSC INTOSC_NOCLKOUT -- HS crystal or resonator
+pragma target clock 8_000_000 -- oscillator frequency
+pragma target WDT disabled -- no watchdog
+pragma target LVP disabled -- no low-voltage programming
+pragma target CCP1MUX RB3 -- ccp1 pin on B3
+OSCCON_IRCF = 7 -- set prescaler to 1 (8 MHz)
+
;@jallib section led
-- LED IO definition
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---
