OK, let's forget this !
Seb 2009/1/19 Joep Suijs <[email protected]> > > Hi, > > 2009/1/19, Sebastien Lelong <[email protected]>: > > Hi again guys, > > > > I've been mistaken this several times... Writing a test file, when I want > a > > LED, I say "@jallib use led". But that's not enough, I must also say: > > "led_direction = output". Shouldn't direction be setup in board, not in > test > > file ? I could use the pins for other purposes, but why would I requite a > > LED then ? > > > In general, the board file does not generate any code and the > prescaler setting for the internal clock of 16f88 is the only > exception. This makes it possible to include a board file and a test > file in a program and compile it. > If we would also put code into the board file, we (but also nebies) > need to generate an example (in other words: remove part of the board > file) to get a working program. > I would not like that. > Besides this, it would also mean that a lost 'use lcd' line could > break the code if someone does try to generate an example. Not good > for newbies too. > > I see your point, but it would not be my choice... > > Joep > > > > -- Sébastien Lelong http://www.sirloon.net http://sirbot.org --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
