Hi Sunish,
Sunish Issac wrote: > About the samples having different crystal frequency, I would suggest to use > the internal oscillator for samples whenever possible. Makes life much > easier. I don't see why a circuit which uses the internal oscillator is so *much* easier than using a resonator. Maybe your suggestion does not apply to the current blink-an-LED samples. but I would be happy to build a script to generate blink-an-LED samples with the internal oscillator (some of the current blink samples already using it)! But then I need a *method* to set the required oscillator and configuration bits which covers *all* PICs in the baseline, midrange and 18F series. Because of the variety of parameters and differences in defaults settings that won't be easy and a lot of work. If you could provide a method..... To make my life somewhat easier I chose the 'HS' oscillator for the current blink samples, which were primarily meant as test-vehicle for the device files. Regards, Rob. -- Rob Hamerling, Vianen, NL (http://www.robh.nl/) --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
