I was on this, it's done (hopefully)...
Seb 2009/7/5 Rob Hamerling <[email protected]> > > > Hi Seb, > > [email protected] wrote: > > > BUILD FAILED: failed compile > > > sample: > /home/build/jallib/slave/standard/build/sample/16f648a_pwm_led_highres.jal > ... Failed > > -- jalv2 output -- > > jal 2.4k (compiled May 8 2009) > > generating p-code > > > /home/build/jallib/slave/standard/build/sample/16f648a_pwm_led_highres.jal:33: > 'pin_ccp1_direction' previously defined > > (and some more of the PWM samples) > > I would be happy to update these samples, but they are generated.... > Now that the CCP1 and CCP2 (direction) pins are in the device files, > these should be removed from the test/board files... > > Regards, Rob > > -- > Rob Hamerling, Vianen, NL (http://www.robh.nl/) > > > > -- Sébastien Lelong http://www.sirloon.net http://sirbot.org --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
