Revision: 1220
Author: sebastien.lelong
Date: Tue Aug 18 22:29:12 2009
Log: var...is to alias...is
http://code.google.com/p/jallib/source/detail?r=1220
Modified:
/trunk/sample/16f877a_print_serial_numbers.jal
/trunk/sample/16f88_data_eeprom.jal
/trunk/sample/16f88_ir_ranger_gp2d02.jal
/trunk/sample/16f88_print_serial_numbers.jal
/trunk/sample/16f88_serial_sw_echo.jal
/trunk/test/external/lcd/test_lcd_hd44780_serial.jal
=======================================
--- /trunk/sample/16f877a_print_serial_numbers.jal Sun Mar 15 10:24:52 2009
+++ /trunk/sample/16f877a_print_serial_numbers.jal Tue Aug 18 22:29:12 2009
@@ -34,15 +34,15 @@
include format
include print
-var bit LED is pin_b0
+alias led is pin_b0
pin_b0_direction = output
forever loop
delay_100ms( 5 )
- LED = high
+ led = high
delay_100ms( 5 )
- LED = low
+ led = low
-- serial_hw_data is a pseudo-var of the desired output-device.
serial_hw_data = "A" -- output an A to the serial port.
=======================================
--- /trunk/sample/16f88_data_eeprom.jal Sun Mar 15 10:24:52 2009
+++ /trunk/sample/16f88_data_eeprom.jal Tue Aug 18 22:29:12 2009
@@ -30,7 +30,7 @@
include pic_data_eeprom
-var bit led is pin_A0
+alias led is pin_A0
pin_A0_direction = output
var byte i = 0 -- counter
=======================================
--- /trunk/sample/16f88_ir_ranger_gp2d02.jal Tue Jun 2 22:48:01 2009
+++ /trunk/sample/16f88_ir_ranger_gp2d02.jal Tue Aug 18 22:29:12 2009
@@ -38,8 +38,9 @@
enable_digital_io()
;@jallib section ccp
--- ccp setup
-var volatile bit pin_ccp1_direction is pin_b0_direction
+-- ccp setup: since CCP1 is multiplexed, we need to define
+-- alias pointing to the active CCP1 pin
+alias pin_ccp1_direction is pin_ccp1_rb0_direction
-- Configure PWM
pin_ccp1_direction = output
include pwm_hardware
@@ -52,10 +53,10 @@
serial_hw_init()
;@jallib section gp2d02
-var volatile bit gp2d02_vin is pin_a4
-var volatile bit gp2d02_vout is pin_a6
-var bit gp2d02_vin_direction is pin_a4_direction
-var bit gp2d02_vout_direction is pin_a6_direction
+alias gp2d02_vin is pin_a4
+alias gp2d02_vout is pin_a6
+alias gp2d02_vin_direction is pin_a4_direction
+alias gp2d02_vout_direction is pin_a6_direction
include ir_ranger_gp2d02
-- set pin direction (careful: "vin" is the GP2D02 pin's name,
-- it's an input for GP2D02, but an output for PIC !)
=======================================
--- /trunk/sample/16f88_print_serial_numbers.jal Sun Mar 15 10:24:52 2009
+++ /trunk/sample/16f88_print_serial_numbers.jal Tue Aug 18 22:29:12 2009
@@ -36,15 +36,15 @@
include format
include print
-var bit LED is pin_b0
+alias led is pin_b0
pin_b0_direction = output
forever loop
delay_100ms( 5 )
- LED = high
+ led = high
delay_100ms( 5 )
- LED = low
+ led = low
-- serial_hw_data is a pseudo-var of the desired output-device.
serial_hw_data = "A" -- output an A to the serial port.
=======================================
--- /trunk/sample/16f88_serial_sw_echo.jal Sun Mar 15 10:24:52 2009
+++ /trunk/sample/16f88_serial_sw_echo.jal Tue Aug 18 22:29:12 2009
@@ -32,8 +32,8 @@
-- because it's a software implementation, we also need to define
-- tx and rx pins. How clever we are: we use the same pin as in hardware,
-- so it works out of the box with any board having an USART module...
-var volatile bit serial_sw_tx_pin is pin_B5
-var volatile bit serial_sw_rx_pin is pin_B2
+alias serial_sw_tx_pin is pin_B5
+alias serial_sw_rx_pin is pin_B2
-- and we also need to specify direction
pin_B5_direction = output
pin_B2_direction = input
=======================================
--- /trunk/test/external/lcd/test_lcd_hd44780_serial.jal Tue Mar 31
01:19:47 2009
+++ /trunk/test/external/lcd/test_lcd_hd44780_serial.jal Tue Aug 18
22:29:12 2009
@@ -37,7 +37,7 @@
led_direction = output
-var volatile bit serial_sw_tx_pin is i2c_scl
+alias serial_sw_tx_pin is i2c_scl
i2c_scl_direction = output
include print -- formatted output library
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---
