Hi Enzo, You're right, I never think about free samples... The only time I used them was for Microchip, and after that (hoping not being the cause) they give up about providing free samples on France, using their website...
Cheers, Seb -- Sébastien Lelong http://www.sirloon.net http://sirbot.org 2009/8/30 seen <[email protected]> > > Hello Seb, > > why don't you ask free samples on the NATIONAL SEMICONDUCTOR website? > > Regards, > > Enzo > > > > On 30 août, 22:57, Sebastien Lelong <[email protected]> > wrote: > > Hi Richard, > > > > > Ok, I will only add 3.3V to spare pin of the power connector, but am > > > afraid i will at least need to add 1 via and maybe more :-(. > > > > Do you mean it would be simpler if you put 3.3V selection and all the > > whistles about 3.3V ?... :) > > > > > > > > > any LDO fixed output 3.3V TO220 with pin connection, Input Gnd Output > > > will do see below > > > > > - NATIONAL SEMICONDUCTOR - LM3940IT-3.3/NOPB - V REG, LINEAR, 3.3V > > > TO220 seewww.Farnell.comartnr: 1469106 IGO > > > - STMICROELECTRONICS - LF33ABV - V REG LDO +3.3V, TO-220-3 see > > >www.Farnell.com > > > artnr: 1087184 IGO > > > - NATIONAL SEMICONDUCTOR - LM2937ET-3.3 - V REG LDO 0.5A +3.3V, 2937, > > > TO220 seewww.Farnell.comartnr: 8207305 IGO > > > > OK, I'll try to find one of these. > > I've ordered more copper clad boards & more stuff on eBay, I hope to > receive > > them this week so I can build this upcoming board next WE. > > > > Cheers, > > Seb > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
