Is L78L33ACZ an option ? TO-92 package, could be used instead of TO-220. But only 100mA output. I don't know if electrical specs are compatible too...
10pcs is approx 4$ including shipping fees: http://cgi.ebay.com/10-pcs-L78L33ACZ-78L33-3-3V-Voltage-Regulator-TO-92_W0QQitemZ350223964793QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item518af99a79&_trksid=p3286.m63.l1177 Cheers, Seb -- Sébastien Lelong http://www.sirloon.net http://sirbot.org 2009/9/2 Sebastien Lelong <[email protected]> > Hi Richard, > > >> >> > > To give you an impression, I uploaded the new drawings in the file >> > > section. >> > > Don’t worry, if the LF33CV is not easy to get then I will change the >> > > pcb to an other one. >> > >> > Can I start to build this board or is it too early ? >> >> Albert mentioned a LD1117 instead off a LF33CV, can you get the LF33CV >> easy, >> >> Maybe before building the board one time the question to all CAN >> EVERYBODY GET A LF33CV or an other LDO TO220 pinning: Input Ground >> Output ????? >> > > I've searched for both LD1117 and LF33CV on eBay but did not found any > results (and just SOT-223 package for LD1117). I know eBay isn't eveything, > but I guess it gives a good impression of what can be found at low cost. > That said, I can also order on Farnell. Local stores usually don't have > anything I want (when I talked about "18F14K50" they said I was mistaken the > name...), or at prohibitive prices, yet it remains an option to make the > board alive. > > So... as for me, don't take into consideration what I say, just do what you > think is the best (how easy ;)... Maybe the most common pinning: "ground > output input" or "input ground output" if I understand correctly. > > >> > >> > Also, if it's easier for you, don't hesitate to commit your designs/ >> > PCB/... using SVN instead of group's file section, even if it's >> > temporary. It'll help having some history about the design, for >> > instance. >> >> Ok but I still name it V11 and overwrite the old one. >> Is it an option to add a map OLD where we can place the old file and >> always have the latest one in the main file map of the jaluino >> section? >> >> > You shouldn't versioned in the filename, as SVN has its own versioning > system. Same for old map, it's not in the SVN logic. That said, let's be > pragmatic: if you need to easily access to old designs, with simple versions > in filenames, just continue to post on file section. We'll integrate them in > SVN once done (like previous version 1.0). > > > Cheers, > Seb > -- > Sébastien Lelong > http://www.sirloon.net > http://sirbot.org > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
