I recently discovered that on my board, the noise is a problem. On digital is ok, and also on analog inputs but the noise appear when I connect the USB cable. I will try to hack the board to reduce the noise but I know I will not be able to do something good until I will have my CNC Router up and running. The next board must be double-sided with GND trace as a shield as much as possible.
The board is for learning and testing new circuits but I also want to have good and accurate results. Vasi On Oct 3, 10:53 pm, vasile surducan <[email protected]> wrote: > Hi Seb, > > In terms of amateur electronics what you've did is interesting. > In terms of proffesional electronics is just funny (I do not want to > dissapoint you saying more, but after a while designing electronics, > solderless breadboard is completely usless and I hope you'll discover that > with your own eyes). > The Effel tower with three boards? > > Vasile > > On 10/2/09, Sebastien Lelong <[email protected]> wrote: > > > > > Hi guys, > > > Some more photos, showing Jaluino board, Styx shield adapting PIC pins to > > Arduino shield, and an Arduino breadboard shield. Blink-a-LED sample has > > been compiled and uploaded to Jaluino 18F4550. LED is connected onto Arduino > > shield, and is blinking. Ok, that may sound obvious, yet it's working and is > > always an emotional step :)... > > > Cheers, > > Seb > > -- > > Sébastien Lelong > >http://www.sirloon.net > >http://sirbot.org --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
