Joep Suijs wrote: > Hi Wayne, > > It seems that we have to dig deeper into this. > The only cause I can think of is the bit calculation overhead that adds to > each bit. Hower to verify this, I need time and my tools, which both are > currently unavailable due to some serious redecoration at home ;) > However, if you create an issue on googlecode, I'll look into > serial_software baudrates at lower clock rates some day. > > And about INTCON_GIE. This is used to disable interrutps. If your pic > doesn't have interrupts or you don't use them, you can just define a bit var > with this name. If your pic has interrupts and you use them, they have to be > disabled. You can do this yourself (and define the var) or use the > pseudo-var construct. I can provide you with some sample code if you want.
Sample code is always welcomed, here! I learn faster that way. I added var bit intcon_gie but the serial software lib keeps complaining about 'intcon_gie' not defined. Then I pulled my head out of my --- and put it before the include serial_software. Now i have '_irp' & '_plath' errors and also what I was afraid of 'Out of data space'. I may be able to fix that though if I can get rid of the other errors. One reason I was asking about the documentation so much was that answers to the questions I have asked you in the past were, in my opinion, not available to the novice JALv2 programmers, which I am. I have wanted to suggest that jallib start a FAQ section but hesitated due to the workload all of you Guru's have now. Thanks again Joep. I hate bothering you on the weekend tho. No rush on the sample code, take your time Wayne > Joep > > 2009/11/28 Wayne <[email protected]> > >> Joep Suijs wrote: >>> 2009/11/24 Wayne [email protected] >>> >>>> Because I did not find any samples of how to use print.jal or format.jal >>>> with serial_sw_write. I don't really understand enough to figure that >> out. >>>> I would like to know if they would work though. >>>> >>> Just init the serial software comms like you do now and use >> serial_sw_data >>> as the first param in stead of serial_hw_data. >>> Haven't tested this, but it should work... >>> >> Joep >> >> I am integrating a Maxim DS18B20 into my application and asked on >> jallist if anyone had a jallib lib they were working on. I got a >> response, with a link, to one that Helge<[email protected]> had >> modified from on that Stef had written back in 2002/4. >> >> In looking at the application I noticed that Helge also had a problem >> getting 9600 baud with a 4 MHZ clock on a 16c84. He had this in the code >> const serial_sw_baudrate = 10400 (this is really 9600 baud). >> >> I just tried that with the 16f628a_lcd_k107sample.jal. What do you know, >> the k107 communicates with LCD now with a 4 MHZ Crystal. >> >> I am reporting this but wish I had the answer as to why this works. I >> also hope that someone else wanting to work at 9600 baud can use the >> information above. >> >> I still can't use it on the 12f509 due to the lack of INTCON_GIE >> which is required by the serial_software.jal lib but sure would like to. >> :-) >> >> Best Regards >> >> Wayne >> >> -- >> >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]<jallib%[email protected]> >> . >> For more options, visit this group at >> http://groups.google.com/group/jallib?hl=en. >> >> >> > > -- > > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
