I've installed SVN client and "checked out" a read-only copy, so my TortoiseSVN client is installed OK?
What next to add/revise libraries? Mike Watterson. On Jan 22, 8:00 pm, "m...@watty" <[email protected]> wrote: > On Jan 22, 6:24 pm, Joep Suijs <[email protected]> wrote: > It would > > > be nice to receive your improvements, either by email if this is a > > one-time contribution or by svn if you join us in the maintenace and > > extension of jallib. > > > As for the hardware connection: this is probably not properly > > documented but if you need it, i can check my test board... > > > Joep > > All models of displays are different.. I tested my connections on PC > parallel port with LCDStudio app for PC. > I have satisfied myself that the Reset pin on most applications/ > displays can be simply tied to VDD,( or maybe via 1k Resistor + 100nF > cap (discharge diode on resistor).). > > I'm using E2 port for CE pin and all the other pins CS1, CS2, DI (AKA > RS), R/W on port B and D0..D7 on port D. I have figured diodes + > resistors to have 12, 16, 25 (4x4 pad, 4 navigation, enter and 4 > option under display) or up to 65 QWERTY (64 keys, and AltGR key is > dioded to "press" Alt & Ctrl). Use port D to drive keys and Port B to > scan keys. > > With 680R to 1K approx in series each drive column via diodes and > diodes in series each scan row to B port which has 10k Ohm pull downs, > even pressing multiple keys can't messup GLCD on same ports. by > default the EN pin on port E2 is disable display ports and thus > keyscan works. > I've done keypad25 and keypad65 versions of the keyboard library, 0 is > no press, 255 is error and 254 is same key. > > I download tortoise SVN (recommended by Sunish) and will figure out > your SVN. Any tutorial? > > I have a lot of stuff I will add. > when I have done the current 3 or 4 16F628/16F877/16F887 projects I > will look at some 18F projects inc USB and simple DSP Radio add ons. > > I will have lib for 16F for LMX24xx dual synth family and also to scan > & store channels on a 2 Euro "pound shop" FM radio. > > . -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
