Revision: 1652
Author: [email protected]
Date: Wed Feb 3 11:23:19 2010
Log: changed because of buildbot failure
http://code.google.com/p/jallib/source/detail?r=1652
Modified:
/trunk/include/external/lcd/lcd_dog_m_4.jal
/trunk/include/external/lcd/lcd_dog_m_8.jal
/trunk/include/external/lcd/lcd_dog_m_spi.jal
=======================================
--- /trunk/include/external/lcd/lcd_dog_m_4.jal Tue Feb 2 12:38:49 2010
+++ /trunk/include/external/lcd/lcd_dog_m_4.jal Wed Feb 3 11:23:19 2010
@@ -159,19 +159,19 @@
_lcd_write_command( 0b_0010_1001 ) -- function 4bit N=1,5x7dots
IS1=1
_lcd_write_command( 0b_0001_0101 ) -- BIAS 3 line setting
end if
- _lcd_write_Command( 0b_0111_0000 ) -- contrast set
- delay_10uS( 3) -- extra delay
- _lcd_write_Command( 0b_0101_1110 ) -- power/ICON/contrast control
- delay_10uS( 3 )
- _lcd_write_Command( 0b_0110_1010 ) -- follower control
- delay_1mS( 210 ) -- extra delay to let display
settle
- _lcd_write_Command( 0b_0011_1000 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0000_1100 )-- display on/off control
+ _lcd_write_command( 0b_0111_0000 ) -- contrast set
+ delay_10us( 3) -- extra delay
+ _lcd_write_command( 0b_0101_1110 ) -- power/ICON/contrast control
+ delay_10us( 3 )
+ _lcd_write_command( 0b_0110_1010 ) -- follower control
+ delay_1ms( 210 ) -- extra delay to let display
settle
+ _lcd_write_command( 0b_0011_1000 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0000_1100 )-- display on/off control
delay_10us( 3 )
- _lcd_write_Command( 0b_0000_0001 )-- clear display
+ _lcd_write_command( 0b_0000_0001 )-- clear display
delay_10us( 40 )
- _lcd_write_Command( 0b_0000_0110 )-- entry mode set, cursor moves
to right
+ _lcd_write_command( 0b_0000_0110 )-- entry mode set, cursor moves
to right
delay_10us( 40 )
end procedure
=======================================
--- /trunk/include/external/lcd/lcd_dog_m_8.jal Tue Feb 2 12:38:49 2010
+++ /trunk/include/external/lcd/lcd_dog_m_8.jal Wed Feb 3 11:23:19 2010
@@ -138,47 +138,47 @@
delay_1ms( 45 ) -- powerup delay for 45mS
if LCD_ROWS == 1 then
- _lcd_write_Command( 0b_0011_0000 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0011_0001 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0001_0100 ) -- BIAS
- delay_10uS ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_0000 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_0001 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0001_0100 ) -- BIAS
+ delay_10us ( 3 ) -- extra delay
end if
if LCD_ROWS == 2 then
- _lcd_write_Command( 0b_0011_1000 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0011_1001 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0001_0100 ) -- BIAS
- delay_10uS ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_1000 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_1001 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0001_0100 ) -- BIAS
+ delay_10us ( 3 ) -- extra delay
end if
if LCD_ROWS == 3 then
- _lcd_write_Command( 0b_0011_1000 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0011_1001 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0001_0101 ) -- BIAS
- delay_10uS ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_1000 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_1001 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0001_0101 ) -- BIAS
+ delay_10us ( 3 ) -- extra delay
end if
- _lcd_write_Command( 0b_0111_0000 ) -- contrast set
- delay_10uS( 3) -- extra delay
- _lcd_write_Command( 0b_0101_1110 ) -- power/ICON/contrast control
- delay_10uS( 3 )
- _lcd_write_Command( 0b_0110_1010 ) -- follower control
- delay_1mS( 210 ) -- extra delay to let display
settle
- _lcd_write_Command( 0b_0011_1000 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0000_1100 )-- display on/off control
+ _lcd_write_command( 0b_0111_0000 ) -- contrast set
+ delay_10us( 3) -- extra delay
+ _lcd_write_command( 0b_0101_1110 ) -- power/ICON/contrast control
+ delay_10us( 3 )
+ _lcd_write_command( 0b_0110_1010 ) -- follower control
+ delay_1ms( 210 ) -- extra delay to let display
settle
+ _lcd_write_command( 0b_0011_1000 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0000_1100 )-- display on/off control
delay_10us( 3 )
- _lcd_write_Command( 0b_0000_0001 )-- clear display
+ _lcd_write_command( 0b_0000_0001 )-- clear display
delay_10us( 40 )
- _lcd_write_Command( 0b_0000_0110 )-- entry mode set, cursor moves
to right
+ _lcd_write_command( 0b_0000_0110 )-- entry mode set, cursor moves
to right
delay_10us( 40 )
end procedure
=======================================
--- /trunk/include/external/lcd/lcd_dog_m_spi.jal Tue Feb 2 12:38:49 2010
+++ /trunk/include/external/lcd/lcd_dog_m_spi.jal Wed Feb 3 11:23:19 2010
@@ -152,47 +152,47 @@
delay_1ms( 45 ) -- powerup delay for 45mS
if LCD_ROWS == 1 then
- _lcd_write_Command( 0b_0011_0000 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0011_0001 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0001_0100 ) -- BIAS
- delay_10uS ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_0000 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_0001 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0001_0100 ) -- BIAS
+ delay_10us ( 3 ) -- extra delay
end if
if LCD_ROWS == 2 then
- _lcd_write_Command( 0b_0011_1000 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0011_1001 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0001_0100 ) -- BIAS
- delay_10uS ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_1000 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_1001 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0001_0100 ) -- BIAS
+ delay_10us ( 3 ) -- extra delay
end if
if LCD_ROWS == 3 then
- _lcd_write_Command( 0b_0011_1000 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0011_1001 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0001_0101 ) -- BIAS
- delay_10uS ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_1000 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0011_1001 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0001_0101 ) -- BIAS
+ delay_10us ( 3 ) -- extra delay
end if
- _lcd_write_Command( 0b_0111_0000 ) -- contrast set
- delay_10uS( 3) -- extra delay
- _lcd_write_Command( 0b_0101_1110 ) -- power/ICON/contrast control
- delay_10uS( 3 )
- _lcd_write_Command( 0b_0110_1010 ) -- follower control
- delay_1mS( 210 ) -- extra delay to let display
settle
- _lcd_write_Command( 0b_0011_1000 ) -- function set lcd port
- delay_10uS ( 3 ) -- extra delay
- _lcd_write_Command( 0b_0000_1100 )-- display on/off control
+ _lcd_write_command( 0b_0111_0000 ) -- contrast set
+ delay_10us( 3) -- extra delay
+ _lcd_write_command( 0b_0101_1110 ) -- power/ICON/contrast control
+ delay_10us( 3 )
+ _lcd_write_command( 0b_0110_1010 ) -- follower control
+ delay_1ms( 210 ) -- extra delay to let display
settle
+ _lcd_write_command( 0b_0011_1000 ) -- function set lcd port
+ delay_10us ( 3 ) -- extra delay
+ _lcd_write_command( 0b_0000_1100 )-- display on/off control
delay_10us( 3 )
- _lcd_write_Command( 0b_0000_0001 )-- clear display
+ _lcd_write_command( 0b_0000_0001 )-- clear display
delay_10us( 40 )
- _lcd_write_Command( 0b_0000_0110 )-- entry mode set, cursor moves
to right
+ _lcd_write_command( 0b_0000_0110 )-- entry mode set, cursor moves
to right
delay_10us( 40 )
end procedure
--
----------------------------------------------------------------------------
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en.
