Hi Richard, It seems you do not compile to the latest SVN version. I don't think there have been any significant changes to the 18f14k50 device file, but am not sure. Maybe Rob knows by heart...
I see some differences in asm file, but there are a few differences in the two sources files too so it is difficult for me to see what caused the asm differences. Could you compile & test the three enclosed files and supply me with the asm files? I think we are dealing with a bug and the files might give more info on the nature. Joep 2010/2/23 Richard.Ellen <[email protected]>: > Hi Joep, > > > > Attached you will find jal and asm files of no good and working OK situation > > > > as you can see, if I add > > > > var byte always_123 = 123 > > > > if (always_123 == 0) then > > print_char_5x7 (" ") > > end if > > > > it is working well and it does not matter if I place the “if…. end if” in > the “forever loop” or before, it still works OK. > > > > If I remove the “if…. end if” than its not good anymore. > > > > Greetz > > > > Richard > > > > > > > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
