Hi Matt,
mattschinkel wrote:
I only have a few PICs to play with,
But you can choose from hundreds of PICs to at least compile a program. When compilation fails, no need to have that PIC! And for each program you should compile for timer 0, 1 and 3. In this way problems like I reported in issue 111 may arise.
And I have never touched a single servo!
I posted a comment: My servo lib requres FOSC/4 to work. In my lib, I set T1CON_TMR1CS = 0. Going by the datasheet of 16f1937, if both TMR1CS1 and TMR1CS0 = 0, it will also use FOSC/4 The datasheet also refers to it as a two bit variable: TMR1CS<1:0>: Timer1 Clock Source Select bits TMR1CS1 and TMR1CS0 should be declared a 2-bits variable named T1CON_TMR1CS
I hesitated because these two bits are not really a binary counter (even though I know that this is not necessary for a multi-bit field).
But OK, I'll make it a bit*2 variable. Regards, Rob. -- Rob Hamerling, Vianen, NL (http://www.robh.nl/) -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
