The board I made with 18F4550 is detected in Windows But as Unknown USB\VID_0000&PID_0000\5&308A5C96&0&1
Should be (in .inf file) %DESCRIPTION%=DriverInstall, USB\VID_04D8&PID_000A I didn't change anything in usb_serial.jal if defined( USB_SERIAL_VENDOR_ID ) == false then-- ----------------------------------------------------------------------- -- USB_SERIAL_VENDOR_ID is set to Microchip if const is not defined by -- the user of the usb_serial library. One can set the USB_SERIAL_VENDOR_ID -- by defining the const before inclusion of the usb_serial library -- ----------------------------------------------------------------------- const word USB_SERIAL_VENDOR_ID = 0x04D8 end if if defined( USB_SERIAL_PRODUCT_ID ) == false then -- ----------------------------------------------------------------------- -- USB_SERIAL_PRODUCT_ID is set to Microchip CDC if const is not defined -- by the user of the usb_serial library can set the USB_SERIAL_PRODUCT_ID -- by defining the const before inclusion of the usb_serial library -- ----------------------------------------------------------------------- const word USB_SERIAL_PRODUCT_ID = 0x000A end if Any ideas folks? -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
