Hi Vasile, It looks really great! And the cut out ... which mean you reworked the board because I didn't :) . The board is professionally executed, I will stare at the image until I will receive the board :D. Thank you very much! I will send my address in private.
Vasi(funlw65) On Jun 1, 10:26 am, vasile surducan <[email protected]> wrote: > Free jaluino PCB is finished, see attach. > Please send me offlist your home address. > > Vasile > > Hi guys, hi Vasile, > > I tried hard but is impossible to make the board in a single layer. Reasons: > - Arduino sockets to close to the margins > - Too many connections from one side cross the plate to another acting as a > barrier to other routes and I don't want to resize the board to make room. > > I started from the ground with a new project and the result was fewer via's > and a better coverage with the GND shield. So, this board is to be made on > order at one of industrial PCB makers because I have already two models > which can be made at home. > As I said, this board is compatible with the other two prototypes of mine > (FreeJALduino5 and FreeJALduino Mega 3c). > > The project is made in a free version of Eagle 5.7 (because my first board > was made starting from Eagle files of Freeduino project) and can be > downloaded from > here<http://sites.google.com/site/funlw65/electronics/jaluino-pinguino-28-...>. > If someone like this board and want to build it, he can order it where he > want. You can do whatever you want with this project. > > Also you must download the freejalduino4.jal library (used as a pin > definition layer) from > here<http://sites.google.com/site/funlw65/electronics/jaluino-pinguino-28-...>. > This library must be included at the top of your jal source (and you don't > need to include device file and pragmas for clock, bootloader and fuses). > A complete documentation is almost done and that will be my final act. I > will close this chapter (I will no bother you anymore) and I will continue > to use this board for my personal projects. > > Cheers, > Vasi(funlw65) > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected] <jallib%[email protected]>. > For more options, visit this group > athttp://groups.google.com/group/jallib?hl=en. > > prod4.jpg > 142KViewDownload > > free_jaluino_small.jpg > 73KViewDownload -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
