User error is fine if you can't accept other version... :) On Wed, Jul 21, 2010 at 11:05 AM, Rob Hamerling <[email protected]>wrote:
> > Hi Vasile, > > > On 07/21/10 02:43 pm, vasile surducan wrote: > > I'm using a 10MHz crystal in HS_PLL OSC mode on a PIC18F44J11. >> I should have 40MHz internal frequency, however blinking the standard >> LED sample gives 2S instead of 500uS period >> (4 time lower like PLL is not enabled). >> If I'm running in HS mode, blinking is OK. >> >> I've found the problem, good to know: enable the PLL from OSCTUNE >> register before setting the pragma >> > > If you would have posted this in Jallist I would consider it as a tip for > programmers, but since you report this in Jallib it looks like a sort of bug > report. Please clarify the 'real' purpose of your report. > > The original sample is correct and in my view the effect of any change is > the user's responsibility. Therefore I qualify your initially wrong blink > frequency as "user error". > > Regards, Rob. > > -- > Rob Hamerling, Vianen, NL (http://www.robh.nl/) > > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<jallib%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
