Please try with last revision. Let me know if it works. Cheers, Seb
2010/10/15 Sebastien Lelong <[email protected]> > Hi Joep, > > It's going on that "Maybe your PIC isn't supported, please report !", which > you seem to do :) > > I'll have a look. > > Cheers, > Seb > > 2010/10/15 Joep Suijs <[email protected]> > > Hi Seb, >> >> I try to use ADC on an 18f242 with the setup: >> const bit ADC_HIGH_RESOLUTION = high >> const byte ADC_NCHANNEL = 8 >> const byte ADC_NVREF = 0 >> include adc >> >> >> This gives an error: >> > c:\jallib\include\peripheral\adc/adc_channels.jal:3291: "You can't >> specify the number of ADC channel with ADC_NCHANNEL, you have to use >> set_analog_pin(...)" >> >> but if I look at the datasheet I see dependent pins. >> But when I try independent anyway I get: >> "ADC channels config: independent pins, via ANS bits" >> c:\jallib\include\peripheral\adc/adc_channels.jal:3127: " >> Unable to configure ADC channels. >> Configuration is supposed to be done using ANS bits >> but it seems there's no ANS bits for this PIC. >> Maybe your PIC isn't supported, please report !" >> >> >> What's going on? >> >> Joep >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]<jallib%[email protected]> >> . >> For more options, visit this group at >> http://groups.google.com/group/jallib?hl=en. >> >> > > > -- > Sébastien Lelong > http://www.sirloon.net > http://sirbot.org > -- Sébastien Lelong http://www.sirloon.net http://sirbot.org -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
