On Wed, Nov 10, 2010 at 12:29 AM, hans <[email protected]> wrote:
> Hi Rob, > I am using a 16F877a at the moment but that needs to much room inside > my toy and because I only need this particular functions I had the > idea that this smaller one could do the same. My first experience with > Matt's servo lib is excellent (being my first step outside bert's > book) so I have started further digging in the jallib area. > If you have another suggestion you are wecome. > PIC16F886 in SSOP package require minimal modifications in your firmware. Vasile > Thanks > Hans > > On 9 nov, 21:02, Rob Hamerling <[email protected]> wrote: > > Hi Hans, > > > > On 2010/11/09 20:26, hans wrote: > > > > > I have spent some time to find some myself .For some Pic types I found > > > a XXXXXX_adc_dependent but not a 16F1827_adc_dependent. Does this mean > > > there is not yet such or it's not possible. > > > I have also tried to change an existing one and have made the latest > > > correction in the adc lib but I receive messages which I don't > > > understand. > > > So can some one put me back on the rail? > > > > > On 8 nov, 19:59, hans<[email protected]> wrote: > > >> I would like to find a small Pic which has 8 ad converters and can > > >> send the values by a separate uart. Is the 16F1827 an option > > > > Experiences with 16F18/19xx are very limited! It doesn't surprise me > > that you got no reactions so far. > > > > As far as number of ADC channels is concerned: have you checked the > > Microchip site to see which PICs have 8 channels or more? Parametric > > search could be of help! > > > > For the Jallib ADC libraries: heve you read the tutorial about ADC at> > http://www.justanotherlanguage.org/ > > > > It contains (almost) everything you need to know about using the ADC > libs. > > > > I don't know if anybody has used the ADC libraries with the 16f1827. It > > could be it is not yet supported. Seb is currently working on it. > > > > For which reason would you want the 16f1827? You might be better off by > > choosing an 18F... > > > > Regards, Rob. > > > > -- > > R. Hamerling, Netherlands ---http://www.robh.nl > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<jallib%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
