2011/2/15 jerome <[email protected]> > On 15/02/2011 12:36, Sebastien Lelong wrote: > > Hi Jerome, > > > > For me it works as expected, it clears the screen though you have to > > set a new position (0,0) to start again. > here are my results ..... > http://www.youtube.com/watch?v=3pFSYk1PjNs > after nothings, forever blank LCD.... >
while first print chars chars, there are garbage pixels below each chars, it seems display is scrolling one pixel by one pixel at each lcd_clear_screen(). When first entering the loop, your inverted "0" is cut, missing one line. So are all following chars. Pretty weird... Maybe use another font library ? (might be a mistake of mine) include glcd_5x7_font include glcd_nokia3310 > > only change was pin def (last issue come from a typo here) > lcd was powerde by jaluino V13 , aded a LED on 3.3V to load regulator. > interfacing was a 1K serial resistor from PIC and 3V zener from LCD to > ground > > > I use this exact same sample on Jaluino, running @48MHz. I don't know > > what's going on on your side. So it does display chars, at least ?? > > How is it powered, 3.3V ? Mine is 3.3V only, no interfacing, so it > > indeed runs slower (page 368) > page 368 of what ? > Of datasheet, only datasheets have such an amount of pages :) Cheers, Seb -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
