Hi guys, I understand that a simple blink a led example does not need all of these. I also understand that we need a fuse template for USB "engine" where is needed and a handy Blink a Led example can be used for this. I also understand that for every PIC needs some specific fuse settings in order to work. If for 4550 VREGEN is required to work, then must be there. if 27j53 have different needs, then those must be specified in his template/sample. I know that all requested are already in datasheet and be sure that anyone are starting to read them even if is slow and sometimes don't help at all a bewildered/perplexed beginner - jallib was always there to help. If is too much, then is ok. I already know how to work with my microcontroller and I can make on my site the required modifications to help my visitors. So, no problem.
Maybe the required advices/tutorials are better to be contained by the jallib book... Vasi P.S. In my opinion, the jallib blog was very helpful to many, don't know how many make comments on justanotherlanguage and jallist is not jallib... -- You received this message because you are subscribed to the Google Groups "jallib" group. To view this discussion on the web visit https://groups.google.com/d/msg/jallib/-/dzJ-kZqquZgJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
