Hi Seb,
On 02/03/12 08:00 pm, Sebastien Lelong wrote:
ok, adc_read(), not set_analog_pin()...
Forget about my last reply :)
OK, the latest adc libraries work for me (only tested channel 29).
Still, I'm struggling with a problem with my test program for the
16f1527. I have a glcd connected to show the results of different adc
channels (4 block of code to do 4 types of tests: different channels,
different resolutions). When I activate 1 block at a time (any block)
the program works as expected. When I activate more blocks the display
sometimes goes blank (depending on the combination of blocks). I cannot
find which piece of code (library) causes this. I have not seen this
behaviour when I tested the KS0108 library, so the adc library is first
suspect! I'll try to find out, link by using a character LCD,
eliminating other libraries, shuffling with my own code, etc.
But there is still an open issue (170) for adc too...
Regards, Rob.
--
R. Hamerling, Netherlands --- http://www.robh.nl
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en.
