Hi Matt,
On 02/25/12 01:52 pm, mattschinkel wrote:
Not having this in samples will not break buildbot. There could be
some samples missed, even if everyone tries to fix samples. Is there
any way to check through software or make a list?
There is no hurry to update all samples. Most samples will work even
without the direction setting RX (and TX).
Most serial samples are generated by Joep. So after he has re-generated
and committed these samples most will be up-to-date.
I'll see if I can make a script to check afterwards if there are
left-overs to be edited.
From what I understand, if I do not fix my samples, they will still
work anyways? I will change my samples, I just wish to be clear on
this.
Yes, assuming the program starts after a power-on reset (RX configured
as input). And depending on the PIC (E}USART it may even work with the
'wrong' direction (I tested this with 16f883/6).
pin_TX_direction should be pin_tx_direction
Why? In the device files the TRIS-bit is declared as 'pin_TX_direction'
(all pin names use this convention).
Regards, Rob.
--
R. Hamerling, Netherlands --- http://www.robh.nl
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en.
