On 27.12.13 17:03, Rob Hamerling wrote:
To my surprise after programming the 18f6723 with Pickit3 the led
blinked, while when programming with the Wisp648 and Xwisp2 no blinking
anymore! Although programming (incl verify) with wisp648 seems to work
fine, I suppose this is a problem with Xwisp2, which I'll have to figure
out...
Well, it seems Wouter's Xwisp2 does not support the 18f6722/23!
The reason is probably that code memory of 18f6680 and many other 18Fs
are written 8 bytes at a time, while for the 18f6722/23 it is 64 bits at
a time. I think the wisp648 firmware doesn't support this.
Since the blink-a-led sample of the 18f6622/23 proved to work when
loaded with another PIC programmer (like Pickit3), the device files and
blink samples of these PICs and their family members can be safely put
in TORELEASE.
Regards, Rob.
--
R. Hamerling, Netherlands --- http://www.robh.nl
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/jallib.
For more options, visit https://groups.google.com/groups/opt_out.
