Hi guys,
I'm struggling with the GLCD_KS0108 library to get a program running on a 18f6310/6680/6720, while the same program runs fine on a 16f886. Of course there are differences in the port/pins used to control the glcd, but I've checked it numerous times and don't see the reason why it should not work. I'm beginning to think that is has to do with the multiplication issue, like casting or lack thereof, as discussed recently in Jalist. So before modifying the library, which contains lots(!) of multiplies, I like to know if anybody here is using the mentioned glcd library *successfully* with an 18F. If so I would appreciate to see the setup for the glcd
Regards, Rob. -- *Rob H*amerling - http://www.robh.nl -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/jallib. For more options, visit https://groups.google.com/d/optout.
