Hi Matt,
On 01/23/2016 09:50 PM, Matthew Schinkel wrote:
Some midrange PICs have the option of choosing 16 bit instead of 8 bit
on timer0
I could only find this with the 16f183xx and 16f188xx
I've found a difference in the prescaller for some timers. Timer 0 on
both PICs have a 1:2 lowest prescaller ratio, where other timers are
1:1. This explained my trouble with TIMER0 in 16 bit mode on 18f4620.
You should use timer1/2
How can the timer lib know what the ratio is without programming every
PIC into the servo lib? Is it enough to go by type?
Maybe it is possible to select by core (PIC_14/14H/16), or by a
declaration of a specific SFR or bit in the device files. Needs some
analysis/verfication.
If your timer1 sample works, add it to jallib.
I'll experiment a little more, but if it works properly I'll add it.
Regards, Rob.
--
*Rob H*amerling - http://www.robh.nl
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/jallib.
For more options, visit https://groups.google.com/d/optout.
