I can hook it up and try again, but it sounds like a power issue. I did 
have it working, but I think I've only tried with external power.

just a guess, but It could also be a timing issue with when USB and SD card 
is initialized, as external power may keep the sd card on.

Matt.

On Friday, June 3, 2016 at 12:41:43 PM UTC-4, Guido Jones wrote:
>
>
> <https://lh3.googleusercontent.com/-ICfTjsfCSWA/V1GzC1j01rI/AAAAAAAAAB0/nmj6pX1I7xU7IY0qskMS49Ky3eKTWJU7gCLcB/s1600/JALLIB-SDC-WIN10_error-2.jpg>
>
>
> <https://lh3.googleusercontent.com/-dhHcpeEV7rU/V1GzEtst5GI/AAAAAAAAAB8/icwzZBk_0IEULtucKdOzabVv6fK6LS-6gCLcB/s1600/JALLIB-SDC-WIN10_error-3.jpg>
>
>
> <https://lh3.googleusercontent.com/-bSPy5bNXs98/V1GzAF6-xHI/AAAAAAAAABs/ZVF0Ah2UwEQBWXW8mztJtSZX8Qr9XzEDQCLcB/s1600/JALLIB-SDC-WIN10_error-1.jpg>
> OK, tried a completely new 18F26J50 board (a custom SMD application I made 
> a while ago), and using SPI2 I get *almost *the same result:
>
> - When externally powered the SD card is recognized and the directory is 
> read correctly.
>
> - When connected to the USB the generic Mass Storage Device is recognized 
> and added to the Device Manager, but the associated drive letter is never 
> assigned.
>
>
> FYI, if no card is inserted, the Mass Storage Device is *not *added to 
> the Device Manager, so it's not an issue of card detection or having a 
> valid card present (it passes that test when present).
>
> Something odd is going on in how Windows interacts with the MSD library.  
> I've attached Windows 10 screenshots of the errors that *both *boards 
> produced, with completely different set-ups.
>
>
> Has anyone categorically got Mass Storage working with any of the 
> USB-enabled 18F PICs?
>

-- 
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/jallib.
For more options, visit https://groups.google.com/d/optout.

Reply via email to