I wouldn't mind taking a look at your board & code if your willing to take the expense. I'm not sure what it's costing you. I'll send you an email. It's a bit hard for me to troubleshoot a PIC that I don't have!
Matt. On Sunday, June 5, 2016 at 11:10:39 AM UTC-4, Guido Jones wrote: > > FYI, This project was my original inspiration: > http://sky.geocities.jp/home_iwamoto/page/P26J50/P26_B02.htm (Use Google > translate!) > > > I went and re-installed Microchip C18 (eval. version required), compiled > the project on that page and low & behold it works a treat! :) The > "Microchip Mass Storage Drive" mounts immediately and the SD card appears > as a drive letter, all the files are there, and I can copy back & forth. > > The minor issue is that I absolutely hate C, and the entire Microchip > MPLAB suite is a disastrously confusing mess, made by geeks, exclusively > for geeks. JAL is the epitome of simplicity in comparison! ;) > > > Sooo, it has absolutely nothing to do with my hardware design, something > is up with the JAL code, but the million-dollar question is what/where? ;) > > I could send you one of my populated test boards and the code, and see > what you can make of it. Let me know if you're interested. > > > > On Saturday, June 4, 2016 at 9:41:39 PM UTC-4, Matthew Schinkel wrote: >> >> I got it working on my other PC, problem was I had turned debugging on. >> This debug feature uses serial, which is too slow. >> >> Make sure you have both of these set to FALSE >> const bit USB_DEBUG = FALSE >> const bit USB_DEBUG_HIGH = FALSE >> >> Wireshark does show me 2 incorrect packets during startup, but the >> windows machine does a packet re-request, and it works. I'll look into >> these errors further. >> >> Do you have debug on? >> >> Matt >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/jallib. For more options, visit https://groups.google.com/d/optout.
