Hi Sunish, Thanks for the feedback.
For IIC I include the standard IIC software or IIC hardware JAL library so the problem may then be in one of these libraries. Did the problem occur when using software IIC or hardware IIC? Also, can you explain what you mean with SDA/SCL being interchanged? Thanks Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens Sunish Issac <[email protected]> Verzonden: zondag 2 augustus 2020 16:11 Aan: [email protected] <[email protected]> Onderwerp: Re: [jallib] JAL Library for SSD1306 graphic display module. Hello Rob, I could test your SSD1306 library today. Nice work Rob. The i2c version works perfectly. Tested with Jaluino2 board and 18f4550. But I couldn't get the SPI version to work. The module which I used had no CS/csn pin. One thing I noticed while using the library was, i2c version gets locked in the init function if SDA/SCL pins are interchanged,ie. if there is no i2c communication. But SPI version was continuing with the init function. Kind regards, Sunish On Sat, Jul 18, 2020 at 8:13 PM RobJ <[email protected]<mailto:[email protected]>> wrote: Hi all, I created a library for the graphic display module using the SSD1306 display controller. For more info (with video) see: http://justanotherlanguage.org/node/321 The library will be available in the next bee package. Kind regards, Rob -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/f78e7935-eb7a-4432-8803-dbb2926de832o%40googlegroups.com<https://groups.google.com/d/msgid/jallib/f78e7935-eb7a-4432-8803-dbb2926de832o%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/CAFGw2pFYo%3DRhQrV1WQjeyYS3N6CtDpKt5cqibFqoEkeKCxWyCg%40mail.gmail.com<https://groups.google.com/d/msgid/jallib/CAFGw2pFYo%3DRhQrV1WQjeyYS3N6CtDpKt5cqibFqoEkeKCxWyCg%40mail.gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/AM0PR07MB62416278C4F21F22CB75250DE64C0%40AM0PR07MB6241.eurprd07.prod.outlook.com.
