Hi and thanks for the information, I'll try to keep the style in mind next
time.
I found a sample named 16f648a_ds18b20_single.jal which uses the library
indirectly. Is that enough?
GreetsKiste
Am Montag, 2. November 2020, 19:30:10 MEZ hat Rob CJ <[email protected]>
Folgendes geschrieben:
Hi Kiste,
I noticed two things when checking the one-wire library:1) There does not seem
to be a sample program that is needed to compile the library. The 'rule' is
that there is at least one sample program for each library. Apparently this one
was missed.2) The combination of capitals and small letters is not allowed
according to the coding convention. I can change it for you in gie_save.
Normally capitals are only used for constants (but that is not an official
convention I think). Below you find the message from Python script:
File: one_wire.jal1 errors found ERROR: one_wire.jal:
59,61,64,75,79,95,97,100,113,117,130,132,135,151,155,167,169,172,188,192,215,217,220,237,241:
Found Capitals in token: 'GIE_save'
I can create a simple sample program but if you have one laying around that we
can use I can upload that too. It has to be something that somebody can easily
use, e.g. sending the temperature as text to a terminal via the USART. If you
do not have something that we can use I will create one this weekend.
Kind regards,
Rob
Van: [email protected] <[email protected]> namens Rob CJ
<[email protected]>
Verzonden: maandag 2 november 2020 12:37
Aan: [email protected] <[email protected]>
Onderwerp: Re: [jallib] RFC: One-Wire and interrupts Hi Kiste,
Thanks for the effort.
I will validate the library (running a Python script to check against the
'coding rules') and will commit it for you.
BTW. Something completely different for all JAL users. In one of the new bee
packages I solved an inconsistency problem in quite some device files. Only is
you use the 'fuses' keyword ZCD, then you must fix that.
Instead of 'pragma ZCD on' it should be 'pragma ZCD enabled' (or disabled). The
motivation for this that for some devices 'on' was enabled and for others 'on'
was disabled. I know changed them all to the correct enabled or disabled.
I am not sure if you will encounter this but at least you are aware in case you
get a compilation error.
Kind regards,
Rob
Van: 'Oliver Seitz' via jallib <[email protected]>
Verzonden: maandag 2 november 2020 11:04
Aan: [email protected] <[email protected]>
Onderwerp: [jallib] RFC: One-Wire and interrupts Hi all!
I've had problems using serial_hw_int_cts and ds18b20 in a program, so I've
made some additions to the one_wire library. You can define a safety level:
Level 1 makes errors to occur less often with few side effects. Level 2 reduces
errors triggered by interrupts to zero, but it will limit e.g. serial reception
to a speed of 19200 baud.
The default of level 0 works as before to keep compatibility.
The most annoying error I've seen was that the "convert temp"-command was
regularly corrupted, so I got during several minutes always the same reading of
the scratchpad which was a temperature of a long time ago.
Then, occasionally the power-up after the write was delayed so the sensors did
reset, giving a wrong temperature of 85°C.
If there are no objections, could someone commit the attached file please?
Thanks,Kiste
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email
[email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jallib/1904390978.575683.1604311459507%40mail.yahoo.com.
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email
[email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jallib/AM0PR07MB62414B69276202DBB418E70CE6100%40AM0PR07MB6241.eurprd07.prod.outlook.com.
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jallib/AM0PR07MB6241785C001B05C06BBE8C41E6100%40AM0PR07MB6241.eurprd07.prod.outlook.com.
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jallib/1779921832.781509.1604343245077%40mail.yahoo.com.
