Hi Vasi, Of course anybody can create the library that they want to create.
If, however, a library becomes part of a Jallib release, it has to comply with the style guide, otherwise the library will not pass the validation check. Any JAL file that is part of a Jallib release and that does pass the validation check will create a build failure. I think that is a good thing about JAL, some minimal requirements for the way you create the code. When I create a library I sometimes look for a version made for Arduino for inspiration. I immediately see that there are no coding rules so libraries vary greatly in quality and readability. Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens vasi vasi <[email protected]> Verzonden: donderdag 25 februari 2021 00:40 Aan: [email protected] <[email protected]> Onderwerp: Re: [jallib] Hc-06 Well Rob, he has the right to do whatever library he wants in Jal language, for whatever reason. The fact that his library does not qualify for jallib project, that is entirely a different matter. On Wed, Feb 24, 2021 at 8:03 PM Rob CJ <[email protected]<mailto:[email protected]>> wrote: Hi Djibril, Thanks for the example but I do not quite understand how this works for the Module. It seems as if you use it as default without any change. A library must offer functions to control the module and so the user can change the default behavior. These functions must make life easier for the user. If you start with JAL (and programming) I would not recommend to make a library since you are stil in the learning phase and it is better to see how others have made JAL libraries before making your own. On Github you find some information about the style guide of any JAL Library: Jallib Style Guide · jallib/jallib Wiki · GitHub<https://github.com/jallib/jallib/wiki/Jallib-Style-Guide> To give you a part of an example of what a user program would look like if you would have a library for the HC-06, you find the sample program that I made for my libary below. In this example I test all the library features (so it is not a real application). -- Sample program (just a piece of it, not the whole program) var byte character var bit all_ok include bt_hc06 -- The HC-06 library print_string(serial_hw2_data,"Sample program for the Bluetooth HC-06 Module.\r\n") -- Initialize the module. This is the same as reset. bt_hc06_init() -- Let's see if the module is connected. all_ok = bt_hc06_alive() -- Change the pincode. all_ok = all_ok & bt_hc06_set_device_pin("1111") all_ok = all_ok & bt_hc06_set_device_name("My HC-06") -- Change the baudrate to something faster. all_ok = all_ok & bt_hc06_set_baudrate(BT_HC_BAUDRATE_19200) if all_ok then print_string(serial_hw2_data,"Module initialzed and alive.\r\n\r\n") else print_string(serial_hw2_data,"Error initializing module.\r\n\r\n") end if print_string(serial_hw2_data,"Checking for data.\r\n") -- We make a Bluetool (wireless) COM Port. forever loop -- If data is received from the Bluetooth Module send it to the USART. if bt_hc06_data_available() then serial_hw2_data = bt_hc06_data end if -- If data was received from the USART send it to the Bluetooth Module. if serial_hw2_data_available() then bt_hc06_data = serial_hw2_data end if end loop ________________________________ Van: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> namens Djibril Sall <[email protected]<mailto:[email protected]>> Verzonden: woensdag 24 februari 2021 17:26 Aan: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> Onderwerp: [jallib] Hc-06 Hi Rob! I'm sorry for late! -- include library 16f877a_bert and serial_hardware included in 16f877a_bert Include 16f877a_bert -- speed is 9600 baud Serial_hw_baudrate -- define rs232 communication usart_hw_serial -- define the pins pin_a0_direction = output -- declaration the variable var byte x forever loop -- send RCREG to the serial port RCREG is a tampon serial_ hw_data = RCREG -- look if the byte is available and RCIF is Serial_hw_available if RCIF then x = RCREG -- naw you use the androide application with app inventor and don't forget hc-06 module is slave if x == "1" then serial_hw_write(x) pin_a0 = high end if if x == "0" then serial_hw_write(x) pin_a0 = low end if end if end loop Thanks I'm going to wait your answer! And I want, you explain me how to build library and command please!! -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/CALqKeO7y17QbbezKWApJm1kDmH4P46B_nDGaaJuDv%2BS2SuT%3Dig%40mail.gmail.com<https://groups.google.com/d/msgid/jallib/CALqKeO7y17QbbezKWApJm1kDmH4P46B_nDGaaJuDv%2BS2SuT%3Dig%40mail.gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/AM0PR07MB6241D4E84AAA2EF87D702611E69F9%40AM0PR07MB6241.eurprd07.prod.outlook.com<https://groups.google.com/d/msgid/jallib/AM0PR07MB6241D4E84AAA2EF87D702611E69F9%40AM0PR07MB6241.eurprd07.prod.outlook.com?utm_medium=email&utm_source=footer>. -- Vasi -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/CABsDq%3D8jkpbPm2gyoayhLmH%3DEsAkcGWfLYNmE5LCu4Eq9e0s2g%40mail.gmail.com<https://groups.google.com/d/msgid/jallib/CABsDq%3D8jkpbPm2gyoayhLmH%3DEsAkcGWfLYNmE5LCu4Eq9e0s2g%40mail.gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/AM0PR07MB624124E53204E44CCA7A38D7E69E9%40AM0PR07MB6241.eurprd07.prod.outlook.com.
