Sorry, my answer was not totally correct. Those pins are input only, the lat and the 'put parts are not available on that device. Also there's no direction for c4 and c5. Anyway, to be used as inputs, the pin_c4 and pin_c5 alias should be defined.
-- var volatile bit  pin_C4          at PORTC : 4 -- var volatile bit  pin_C5          at PORTC : 5 -- Greets, Kiste Am Montag, 26. Juli 2021, 09:01:31 MESZ hat 'Oliver Seitz' via jallib <[email protected]> Folgendes geschrieben: Hi Majid, this time, you really spotted a device file error. The chip has no pin_c3, but the device file does also not define the pins c4 and c5, which is indeed an error of the device file. Until the device file is fixed, add these lines to your program: -- var volatile bit  LATC_LATC4        at LATC : 4 var volatile bit  pin_C4          at PORTC : 4 -- procedure pin_C4'put(bit in x at LATC : 4) is   pragma inline end procedure -- var volatile bit  LATC_LATC5        at LATC : 5 var volatile bit  pin_C5          at PORTC : 5 -- procedure pin_C5'put(bit in x at LATC : 5) is   pragma inline end procedure -- Greets, Kiste Am Montag, 26. Juli 2021, 08:48:48 MESZ hat majid ebru <[email protected]> Folgendes geschrieben: Hi to all I use PIC18F2550. When I complie I have error [Error] (X-GLCD-10.jal) [Line 69] "pin_c4" not defined [Error] (X-GLCD-10.jal) [Line 69] '=' expected (got 'pin_c4_direction') [Error] (X-GLCD-10.jal) [Line 70] "pin_c4_direction" not defined [Error] (X-GLCD-10.jal) [Line 70] unexpected token: pin_c4_direction Pin_c4 undefined ?!!Why 😳😳😳🤣 -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/c16e1fb4-0547-48ef-9954-224bb58f8bf8n%40googlegroups.com. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/1669519631.747340.1627282888545%40mail.yahoo.com. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/687613790.752262.1627283190792%40mail.yahoo.com.
