hello back to my previous question. We want to run a... Pan Tilt 2 Axis FPV Camera Gimbal Mount....(raspberry pi).. with this toddler and I think that attached program should work. As soon as we have the Gimbal in we will try. Any comments in advance are welcome regards Hans
Op vrijdag 22 juli 2022 om 08:07:28 UTC+2 schreef hans: > Hi Rob, > Sorry for my bad iphone message. The file I sent is the one I edited. The > original from the sample list didn't work, hence my request to check the > original. > regards > Hans > > Op donderdag 21 juli 2022 om 22:30:00 UTC+2 schreef [email protected]: > >> Hi Hans, >> >> I think I did not understand your remark. >> >> Is the program that you attached to this discussion not working anymore >> now that you changed because of the changed ADC libraries? >> >> If so I can have a look at it and get it working again. I can test it >> with a potentiometer and a LED. >> >> Thanks. >> >> Kind regards, >> >> Rob >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens Hans Van >> Veldhuizen <[email protected]> >> *Verzonden:* donderdag 21 juli 2022 22:09 >> *Aan:* [email protected] <[email protected]> >> *Onderwerp:* Re: [jallib] mini_teacher >> >> Hi Rob, the program i used from the samples i had to change. Seen my >> previews message. >> We used this pic also to control a servo. Maybe it is possibil to expand >> to 2 servo and two pots for acamera gimball >> >> Op do 21 jul. 2022 21:44 schreef Rob CJ <[email protected]>: >> >> Hi Hans, >> >> Do you mean the program you modified for the changed ADC libraries? >> >> Kind regards, >> >> Rob >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens hans < >> [email protected]> >> *Verzonden:* donderdag 21 juli 2022 21:11 >> *Aan:* jallib <[email protected]> >> *Onderwerp:* Re: [jallib] mini_teacher >> >> Hi Rob,, >> The original did not work, so please check my changes. >> regards >> Hans >> >> Op donderdag 21 juli 2022 om 20:48:34 UTC+2 schreef [email protected]: >> >> Hi Hans, >> >> So you already got this application. You mean you changed to code to work >> the ADC libraries that changed some time ago? Great. >> >> With the components you mentioned I cannot think of another application >> but if somebody has an idea I am willing to build an application for it. >> >> Maybe if you add an 8 Ohm loudspeaker we could make a tone sweep. >> >> Kind regards, >> >> Rob >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens hans < >> [email protected]> >> *Verzonden:* donderdag 21 juli 2022 20:39 >> *Aan:* jallib <[email protected]> >> *Onderwerp:* Re: [jallib] mini_teacher >> >> Rob, >> I have changed the lib and it works also with the little motor >> >> Op donderdag 21 juli 2022 om 20:13:40 UTC+2 schreef hans: >> >> hI rOB, >> We used the 12F683_pwm_adc for a led, the little motor just on/ off >> BD677 with 1K base resistor >> . regards >> Hans >> >> Op donderdag 21 juli 2022 om 19:17:16 UTC+2 schreef [email protected]: >> >> Hi Hans, >> >> That is a nice approach to get started. >> >> I could make a program that you can control the speed of the motor or the >> brightness of the LED with the potentiometer or do you already have such a >> sample program? >> >> Which power transistor is being used? >> >> Kind regards, >> >> Rob >> >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens hans < >> [email protected]> >> *Verzonden:* donderdag 21 juli 2022 16:07 >> *Aan:* jallib <[email protected]> >> *Onderwerp:* [jallib] mini_teacher >> >> Hello all, >> Every now and then I try to persuade someone to start working with JAL. >> After a while I regularly get a response that it didn't work. It is often >> indicated that all those thick books and those large things with all those >> legs are unattractive. >> That's why I made a very small set with a 12F683, with a led, a >> potentiometer, a power transistor and a motor. Also the wisp648. >> The set has now returned for the third time stating that they have played >> with it and now plan to continue with it. >> Attached are some pictures. >> My question is now : If you have more example programs for this little >> boy, we are recommended. >> So you see, it's still fun. >> regards >> Hans >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/46992481-9828-4df0-8c36-d628dfae09fcn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/46992481-9828-4df0-8c36-d628dfae09fcn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/877ec48e-10bd-4abe-b813-5af85de52998n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/877ec48e-10bd-4abe-b813-5af85de52998n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/964e2c7b-901a-465f-a81c-59c21bb7506en%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/964e2c7b-901a-465f-a81c-59c21bb7506en%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/GVXP195MB16371F7AEF745940A4427DF2E6919%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM >> >> <https://groups.google.com/d/msgid/jallib/GVXP195MB16371F7AEF745940A4427DF2E6919%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/CAPJHSP%3Deou0S_680Dm84whsB6ij2OqLuH_2m-Y78FP5d1tHD9w%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/jallib/CAPJHSP%3Deou0S_680Dm84whsB6ij2OqLuH_2m-Y78FP5d1tHD9w%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/ced7dafd-2066-4d6d-b2a8-3a056084f588n%40googlegroups.com.
12f683_servo.jal
Description: Binary data
