Hi Peter, I do not have enough information to answer your question. Which serial library are you using? Do you have a delay in writing to the serial interface since the SD card will be much faster than the serial interface and it might be that your computer is not able to keep up with it.
Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens Zet Weeh <[email protected]> Verzonden: donderdag 15 september 2022 11:40 Aan: jallib <[email protected]> Onderwerp: [jallib] Sample of Matt for SD with fat 32 and problem with hex file Hi everybody I have a picture in hex that is working fine on an oled. I want to use it on a sd-card that's build in ILI9341. When I use the sample of Matt I can write and read all of the sample; so it's working fine. The hex file is 500 bytes so one cluster. When I want to write and read the hex to the SD I can see in RealTerm that the writing is going fine till byte 400 and then it becomes a mesh. I changed the baudrate but that did not help. Has anybody a suggestion what is going wrong and what to do? Peter -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/21e71303-1a48-4696-95fb-cb227a8ffcaen%40googlegroups.com<https://groups.google.com/d/msgid/jallib/21e71303-1a48-4696-95fb-cb227a8ffcaen%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB16371DFB89BCD321725341C7E64B9%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM.
