Send me the hex. I will ensure it works. I am sure it does, but, even if it does not.. it will because we will ensure it does. :-)
Evan On Sunday, 23 October 2022 at 11:50:56 UTC+1 vasile wrote: > Rob, what is "bug free" ? I have never heard about such a thing... > :) > Assuming your pickit3 software and companion definition file is compatible > with PIC16F8857, your problem might be from an incorrect connection to ICSP > or heavily loaded iclk and dat lines. One option is to "filter" those lines > with 200ohm-680ohm resistors in series between the pic and your load, while > your programmer stays connected directly to the PIC ICSP lines using as > short as possible cable ( aka 20-30cm). The other issue I saw is the USB > cable length and quality. > > On Sun, Oct 23, 2022 at 12:47 PM [email protected] <[email protected]> > wrote: > >> Hello all, >> >> This is for your information. I am looking at a problem I have with my >> PIC16F18857. It goes haywire when the code size becomes large (> 16 Kbyte). >> >> I did not yet find the root cause but I ran into another issue with the >> PicKit minus software. >> >> Although I am normally able to program the PIC16F18857 with this software >> it gives the following error when programming this large program (see >> attachment). It seems that the program is programmed correctly but still >> you do not want this type of error. >> >> The problem does not occur when using MPLABX IPE. >> >> So maybe better go for Evans PICKit Plus Software, not free but I assume >> bug free ... >> >> Kind regards, >> >> Rob >> >> >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/eb4d4a4d-5a10-45ab-8872-630303f75d32n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/eb4d4a4d-5a10-45ab-8872-630303f75d32n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/1611f65e-f8f4-43ab-a56b-721173aa89aen%40googlegroups.com.
