Hello Hans, There should not be any interference as far as I can see. The servo library uses regular pins so does the ads7833 library.
If you could share your program that could help to analyze the issue. I did hear from Peter some time agaon that he had problems with regular pins when using PPS. That was solved by defining the regular pins after PPS was done. If he declared them before executing PPS (not sure by the way if you are using PPS) then it did not work. Strange behaviour btw. Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens hans <[email protected]> Verzonden: woensdag 9 november 2022 11:11 Aan: jallib <[email protected]> Onderwerp: [jallib] ADS file with rc-master Hello , I am trying to combine the fine working example from the sample file : 16F18877_touch_ads7843.jal with the servo lib : servo_rc_master. I can not do that. Is this combination possible and if so, what should I pay attention to? But thanks again in advance. Hans -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/bdcbdf9e-502c-4e2c-90ed-b5c3dcd2f78bn%40googlegroups.com<https://groups.google.com/d/msgid/jallib/bdcbdf9e-502c-4e2c-90ed-b5c3dcd2f78bn%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB16375A2D632E2FDDC2EDE213E63E9%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM.
