Thanks for the offer, Evan
I am a hobbyist, so it is not for commercial use.
I was looking for a solution in the form of a small program written in
VB or whatever language, producing an EXE file which, once called from a
bat or cmd would generate a SQTP file following the Microchip format,
and containing the current date and time. That file is then passed as
a parameter to PK3cmd.
My goal is only to have the date and time at which the PIC was programmed.
The memory region may vary (EEPROM, Top of Program memory, top of
HEF....) and could also be a parameter
See file format : https://microchipdeveloper.com/ipe:sqtp-start
Le 14-11-22 à 19:03, '[email protected]' via jallib a écrit :
We may be able to help.
PICKitPlus has a set of features in the PK+Gang Programmer that covers
this. But, that is expensive.
We can add to our base software this SQTP capability.
Questions: Is this commercial usage? And, where is the value written
to? (Which memory area ?)
You can ping me directly so we can get you involved in any development.
Evan
On Saturday, 12 November 2022 at 13:40:56 UTC [email protected] wrote:
Hi there,
Whenever it's possible, I use a TL866 programmer with the MiniPro
programming software.
One function I really like about that software is the ability to
generate and write auto-serial numbers (which in itself is nothing
special, because known as SQTP in MPLab IPE).
But one of the possible choice of format for those serial numbers
is the current date and time.
You also have the choice of the memory in which program it
(EEPROM, Top of Program memory,....) See attached screenshot
Unfortunately, newer PIC's are not supported by TL866, and then, I
have to use my PicKit4 with MPLab IPE.
But MPLab IPE does not support this usefu function.
Does anyone have the knowledge of a way I could achieve this, may
be with a batch file generating the date and time and use it as
parameter for the command line of PK program ?
I am not fluent enough in writing batch or cmd files to achieve
this, so if anyone could help....
Thanks in advance
--
You received this message because you are subscribed to the Google
Groups "jallib" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jallib/2db227b3-fa15-4a43-a997-c6c6c3f307den%40googlegroups.com
<https://groups.google.com/d/msgid/jallib/2db227b3-fa15-4a43-a997-c6c6c3f307den%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jallib/6c754dea-0c84-f9af-03d9-ae323c9b482e%40gmail.com.
