Hi Hans, There must be an issue with your circuit. Do you have the correct clock speed? Make sure a blink sample and normal serial port is working. Try another PC. Windows should pick it up.
Matt. On Friday, December 9, 2022 at 3:12:12 PM UTC-5 hans wrote: > Hello, > Thank you. I did what you recommended. Last Bee and tip from Vasile. Same > message from windows, not recognized and causing a malfunction. Pffffff/ > regards > Hans > > Op vrijdag 9 december 2022 om 18:43:24 UTC+1 schreef [email protected]: > >> Hi Hans, >> >> As Vasile already mentioned Windows 10 will detect your device as a >> serial (COM) port without the need of installing a separate driver. >> >> Make sure you have the USB connections right. The signals are not crossed >> like for USART, so D+ to D+ and D- to D-. >> >> I attached a schematic diagram based on the PIC16F1455 for your >> information and the USB connectors and what the signals look like. >> >> Good luck! >> >> Kind regards, >> >> Rob >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens >> vsurducan <[email protected]> >> *Verzonden:* vrijdag 9 december 2022 18:12 >> *Aan:* [email protected] <[email protected]> >> *Onderwerp:* Re: [jallib] USB_help >> >> Hi Hans, >> for win10 you do not need any special driver, just a good terminal like >> Teraterm. >> Download the last jal package, Rob did some modifications on USB driver, >> my suggestion is to use const USB_INTERRUPT_DRIVEN = TRUE >> The maximum speed is about 100kbps. >> >> >> >> On Fri, Dec 9, 2022 at 5:42 PM hans <[email protected]> wrote: >> >> Hello, >> I am trying to learn more about USB and have tried a sample program( ex >> 18F2450) (see attachment) I keep getting the remark that windows 10 does >> not recognize the connection and cannot install the driver. What am I doing >> wrong?? >> regards >> Hans >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/c92e6cb2-a584-4b1b-a77f-d8bf943560b2n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/c92e6cb2-a584-4b1b-a77f-d8bf943560b2n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/CAM%2Bj4quO70sp3CP%2BezE5_6jDU%2BpsJ2D7-MAU9bzRm1U1RbmACA%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/jallib/CAM%2Bj4quO70sp3CP%2BezE5_6jDU%2BpsJ2D7-MAU9bzRm1U1RbmACA%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/ae78e236-5097-4087-a043-e0f1d2bd96c1n%40googlegroups.com.
