Hello Rob, Thank you for your time on this issue. Don't worry much. Take your time. As I said above, have also found another way of reaching the same result with a code not much different. So, for me its a solved issue for now. But understand you in raising new compiler issue as it should be addressed in future for a better compiler. Thank you very much.
Cheers, FS On Saturday, December 17, 2022 at 6:03:54 PM UTC [email protected] wrote: > Hi Filipe, > > I did some analysis and it seems to be a compiler issue. I registered the > issue under: https://github.com/jallib/jalv2compiler/issues/26 > > <https://github.com/jallib/jalv2compiler/issues/26> > Problem when incrementing index and using index directly in a function > call · Issue #26 · jallib/jalv2compiler > <https://github.com/jallib/jalv2compiler/issues/26> > Given this code -- This goes wrong. print_string(serial_hw_data, > "Test 1 must show C to J : ") for (MY_ARRAY_SIZE - 2) using index > loop variable_array[index + 1] = data_eeprom(index + 1) ... > github.com > I also added the analysis where the problem is visible in the assembly > code. Maybe too much detail but handy for later. > > I was working on another compiler issue (#25) but got it only partly > solved and now I am stuck with the part that is not yet working correctly. > > Maybe I will have a look at this issue later. For now the workaround > works, which is also shown in the analysis. > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens Rob CJ < > [email protected]> > *Verzonden:* zaterdag 17 december 2022 11:33 > *Aan:* [email protected] <[email protected]> > > *Onderwerp:* Re: [jallib] Re: For Loop Issue > Hi Filip, > > The problem with these kind of issues is finding the reproduction > scenario. I made one and found indeed a problem which might be a compiler > issue. > > Attached you find a test program that I made to reproduce your issue. > There are 6 test and test number 5 goes wrong (when counter is not equal to > 0) and a workaroud is given in test 6 by using a temporary variable. The > output of test 5 and test 6 should have been the same but it is not, see > screenshot below. > > > > I need to analyze this further to see where the compiler goes wrong. For > now your problem could be fixed by using a temporary variable. Please give > it a try and let me know if it solves your problem. > > > Thanks. > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens flyway38 < > [email protected]> > *Verzonden:* vrijdag 16 december 2022 22:46 > *Aan:* jallib <[email protected]> > *Onderwerp:* Re: [jallib] Re: For Loop Issue > > Missed this information above. > n goes from 0 to something like 20, and nSmsCenterPhone is also a byte > and assumes 12 in this case. > > > On Friday, December 16, 2022 at 9:41:07 PM UTC flyway38 wrote: > > Hi Rob, > > Thanks for your support. > Both vars are bytes. > > Cheers, > FS > > On Friday, December 16, 2022 at 6:52:05 PM UTC [email protected] wrote: > > Hi Filip, > > No idea. I need to see if I can reproduce this. > > Of what type are Index and n? What is the value of n? > > Thanks > > Kind regards, > > Rob > > ------------------------------ > *Van:* [email protected] <[email protected]> namens flyway38 < > [email protected]> > *Verzonden:* vrijdag 16 december 2022 19:34 > *Aan:* jallib <[email protected]> > *Onderwerp:* [jallib] Re: For Loop Issue > > Heres the issue in a different form: > This code works: > for nSmsCenterPhone+1 using Index loop > SmsCenterPhone[Index]=data_eeprom(Index+n)+48 > end loop > SmsCenterPhone[0]=data_eeprom(n) -- Insert > "+" @[0] > > This should work and the same, but no... it doesn't work. > SmsCenterPhone[0]=data_eeprom(n) -- Insert > "+" @[0] > for nSmsCenterPhone using Index loop > SmsCenterPhone[Index+1]=data_eeprom(Index+n+1)+48 > end loop > > Very odd issue. > Any ideas? > Thank you. > > Cheers, > FS > On Friday, December 16, 2022 at 6:15:16 PM UTC flyway38 wrote: > > Hello all, > > Have found an odd issue. > Maybe me not doing it right, but need to ear from you about it. > Here's the code: > > for nSmsCenterPhone using Index loop > SmsCenterPhone[Index+1]=data_eeprom(Index+n)+48 > end loop > > Situation is; I need to start filling array SmsCenterPhone[20] starting > from 2nd byte [1]. > It fails and don't understand why. > EEprom data is ok. Have double checked it. > Have found that it works if I don't add +1 do Index to > SmsCenterPhone[Index+1], but would like to understand why this is happening. > Thank you very much. > > Kind regards, > Filipe Santos > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/a5e8729b-7dc4-4f2d-904f-7950f3b3d05cn%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/a5e8729b-7dc4-4f2d-904f-7950f3b3d05cn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/adb14af6-a36e-4440-9c9d-14d69514636fn%40googlegroups.com > > <https://groups.google.com/d/msgid/jallib/adb14af6-a36e-4440-9c9d-14d69514636fn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/jallib/GVXP195MB1637CA9F2DBE49FAB7B1C589E6E79%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM > > <https://groups.google.com/d/msgid/jallib/GVXP195MB1637CA9F2DBE49FAB7B1C589E6E79%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/5e3c6661-db05-475d-992f-24617058da52n%40googlegroups.com.
