Hello Tom,
Delicious, a JAL project !! That is the great strength of Arduino, 
practical examples.
It looks like my problem. Now my wind direction works with a Greats disc 
and light cells, but they are affected by the weather.
.
  That's why my question. Do you use the analog output or the spi? Do you 
work wirelessly? And do you also have information for me about the program?
Well, the risk if you give me an answer that I have many more questions
  I ordered a set with the magnet
  It's still fun.
regards
Hans

Op maandag 26 december 2022 om 09:15:30 UTC+1 schreef Tom:

> (Resend to provide smaller attachment)
>
>
> -------- Forwarded Message -------- 
> Subject: Re: [jallib] AS5600 
> Date: Sun, 25 Dec 2022 14:15:33 -0500 
> From: Tom Crawford <[email protected]> 
> Reply-To: [email protected] 
> To: [email protected] 
>
> Hello Hans,
> Yes, I have some experience with it.
> I needed to replace a failing set of reed switches in a weather vane.  I 
> replaced them with an AS5600 sensor, and did some testing with it.
> I have attached a PDF file from a presentation I did in September, that 
> may be of interest.  The overall project was the refurbishing of our Little 
> Free Library.  The weather vane discussion (mainly photos) is in the 2nd 
> half of the PDF, showing the old reed switch / I2C installation, and the 
> new AS5600 install inside the 3D printed mounting.  The upgrade is not 
> outdoors yet, so not weather tested...
>
> Some things to be aware of:
> - the rotating magnet and it's mount location are very critical.  I 
> originally did not order the AS5600 (from Aliexpress) with magnets, since I 
> have a large collection of small salvaged magnets in my junk box.  But only 
> 2 of those magnets had the correct orientation of magnetic field to 
> adequately  operate the AS5600!  See test graph for results; a proper 
> magnet would produce even better results.  I have ordered additional 
> AS5600's for other uses, and included the proper magnets with that order.
>
> Tom
>
>
>
> On 12/25/2022 4:35 AM, hans wrote:
>
> Hey
> I need a position sensor that provides a rotation of 360 degrees. I found 
> the AS5600. Does anyone have experience with this?
> regards
> Hans
> -- 
> You received this message because you are subscribed to the Google Groups 
> "jallib" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/jallib/cb4a9866-829f-46cb-90dc-2b3bf14ae59en%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/jallib/cb4a9866-829f-46cb-90dc-2b3bf14ae59en%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>  
> Virus-free.www.avast.com 
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>  
> <#m_-5172031385688370383_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>

-- 
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/jallib/0a123447-d3f5-44b8-8b34-5cce6d39d77dn%40googlegroups.com.

Reply via email to