Hi Hans, Not sure if I understand you correctly but you have 2 enable pins, 1 for each display. Why do you want to change the alias of a pin? Why not just use the 2 pins and use 2 aliases? I do not understand the difference between changing aliases and changing pins.
Can you explain it in more detail? Thanks Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens hans <[email protected]> Verzonden: woensdag 15 februari 2023 21:00 Aan: jallib <[email protected]> Onderwerp: [jallib] double LCD Hi all, I have a few LCDs which have 2 x 2 character lines. All connections are common, but each part has its own enable. So if I change the enable I can control both. Is there a way to change the alias of the enable in the program to change to another pin? regards Hans -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/37f2b309-6b73-465a-be49-dda946113510n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/37f2b309-6b73-465a-be49-dda946113510n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB1637F619FB2BC70ABBFC7718E6A09%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM.
