Hi, I have been working with this file for a while now, and all seems fine as it usually does.
On Tuesday, March 28, 2023 at 11:34:26 PM UTC+2 [email protected] wrote: > Thanks a lot Rob! I will let you know if I can see anything wrong with it > in a few days. > Thanks for the superfast response! > Andreas > > On Tuesday, March 28, 2023 at 2:19:43 PM UTC+2 Rob CJ wrote: > >> Hi, >> >> That device file is not yet released since it was not tested yet. >> >> You can give it a try, see attached device file. I assume it works since >> I did not encounter any problems over the last year. >> >> I am curretly using an 16F18076 without problems in the device file (not >> in the chip though 🙁). >> >> Can you let us know if it works? >> >> Thanks. >> >> Kind regards, >> >> Rob >> >> ------------------------------ >> *Van:* '[email protected]' via jallib <[email protected]> >> *Verzonden:* dinsdag 28 maart 2023 13:16 >> *Aan:* jallib <[email protected]> >> *Onderwerp:* [jallib] missing devicefile for 16F18075.jal >> >> Hello everyone, I started a new projet based on this device, but no >> devicefile yet. Can anyone provide one? Thank you! >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/a8f785f8-ac3f-4fe1-af7e-42a324fa0ac3n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/jallib/a8f785f8-ac3f-4fe1-af7e-42a324fa0ac3n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/bd47bfff-c658-497d-b54c-b322cbe1d527n%40googlegroups.com.
