Hi David, Same issue, not yet in MPLABX so not able to generate a device file yet.
I wanted to suggest the site of Microchip to select the device but I saw you already found it. It is indeed not a handy site or you must be very patient. Kind regards, Rob ________________________________ Van: [email protected] <[email protected]> namens Pinhead <[email protected]> Verzonden: maandag 10 april 2023 19:13 Aan: [email protected] <[email protected]> Onderwerp: Re: [jallib] Device file for PIC16F17156 Thanks Rob, In the meantime, I was also looking also for another model and found 18F24Q71 that could meet my expectations, but it is not (yet) supported by jal either..... What I need: MANDATORY: - Two SPI bus (CLK and Data will be shared; /CS will select the chip) - One I²C bus - One simple serial port (DT + CK) - One OPA that can be configured in Unity gain mode - ADC (8 bit resolution is enough) - At least two 16-bit timers - At least two 8-bit timers - 28-pins form factor with 25 I/O pins (/MCLR not included) - 128-bits of EEPROM or HEF or NVRAM - A fair amount of program memory since my application will include a lot of strings (at least 7 k) NICE TO HAVE: - PPS - ADC can be configured to internally connect to OPA_Output as input - RTCC I will not buy or order samples as long as I am not sure at 80% of which reference I will use, so I will not be able to test a device file in real condition, but thanks for the proposal. By the way, The Microchip selection tool on their website really sucks. Does anyone know of a simplier way to enter criteria to search for a suitable part ? Have a nice day Le 10-04-23 à 18:58, Rob CJ a écrit : Hi David, As soon as the devices is part of MPLABX I can create a device file. Since it is not yet available in MPLABX 6.05 I also did not yet order a sample for testing. When a new version of MPLABX is out where and that device is in, I can send you an untested device file. I do not know when a new version of MPLABX is released so we have to wait for it. Kind regards, Rob ________________________________ Van: [email protected]<mailto:[email protected]> <[email protected]><mailto:[email protected]> namens [email protected]<mailto:[email protected]> <[email protected]><mailto:[email protected]> Verzonden: maandag 10 april 2023 17:41 Aan: jallib <[email protected]><mailto:[email protected]> Onderwerp: [jallib] Device file for PIC16F17156 Hi there, Starting a new project, I was considering using the 16F17156. But the device is still very new and the device file apparently does not exists yet. Do you have an idea if and when it could be available ? Otherwise, I can also consider using another PIC.... Thanks for your answer, and have a nice day, David -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/97722f64-5f8b-495c-afe4-d9f97c3e56c2n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/97722f64-5f8b-495c-afe4-d9f97c3e56c2n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB163791E6F225FA4A4B994CABE6959%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM<https://groups.google.com/d/msgid/jallib/GVXP195MB163791E6F225FA4A4B994CABE6959%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/d162cc1d-8f79-5230-2a28-be44ba631dbb%40gmail.com<https://groups.google.com/d/msgid/jallib/d162cc1d-8f79-5230-2a28-be44ba631dbb%40gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/GVXP195MB1637FA596ED77699EE57BDFDE6959%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM.
