hi Rob, I have compiled the 18f4431 and a hex file was made, but after programming the pic with pickit 3, the error occurred "programming failed at program memory address 0x000000".Maybe the adc library must, as you said before, changed. kind regards Jos
Op di 9 apr 2024 om 21:09 schreef jos smans <[email protected]>: > Hi Rob, > Thank you very much for your support. It works excellent. > Kind regards > Jos > > Op di 9 apr 2024 om 19:48 schreef Rob CJ <[email protected]>: > >> Hi Jos, >> >> The problem is in the ADC library. Apparently the 18F4431 has a different >> way of selecting the ADC channel that I have never seen before. >> >> I made a quick fix and added the channel selection for your PIC but to >> the attached ADC library did not test this so you should give it a try. The >> code I added could be simplified but that is something that could be done >> later. >> >> So place the attached ADC library in the directory of your program >> recompile it and let me know if it works. >> >> Thanks. >> >> Kind regards, >> >> Rob >> >> ------------------------------ >> *Van:* [email protected] <[email protected]> namens jos >> smans <[email protected]> >> *Verzonden:* dinsdag 9 april 2024 16:56 >> *Aan:* jallib <[email protected]> >> *Onderwerp:* [jallib] Greenhouse >> >> Good day, i have a problem with a program to make automatic my >> greenhouse. With pic 18f4455, it works fine, but not with pic 18f4431.I >> think its a adc fault but i am not sure. >> Can someone help me? thanks >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/eaae0d75-efe1-4bdc-b6ce-ca87db6dd560n%40googlegroups.com >> <https://groups.google.com/d/msgid/jallib/eaae0d75-efe1-4bdc-b6ce-ca87db6dd560n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- >> You received this message because you are subscribed to the Google Groups >> "jallib" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/jallib/GVXP195MB1637171120AC6BA343AB4AFFE6072%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM >> <https://groups.google.com/d/msgid/jallib/GVXP195MB1637171120AC6BA343AB4AFFE6072%40GVXP195MB1637.EURP195.PROD.OUTLOOK.COM?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jallib/CAMK-nAftmPUHcT-g_kMvgQW0HykAT40z2yZi7z_cKAsxjbO%2BUQ%40mail.gmail.com.
