Hi Rob, I'm trying to understand the PWM in PIC12F1572, for which the pwm library can not be used.
I need to see the system clock. The problem is that I can not make it visible on clockout pin. The following code should do it? include 12f1572 -- target PICmicro -- ;pragma target clock 32_000_000 -- oscillator frequency pragma target clock 8_000_000 -- oscillator frequency -- pragma target OSC INTOSC_NOCLKOUT -- internal oscillator pragma target PLLEN DISABLED -- PLL off pragma target CLKOUTEN ENABLED -- clock output enabled pragma target WDT DISABLED -- watchdog pragma target BROWNOUT DISABLED -- no brownout reset pragma target LVP ENABLED -- low voltage programming pragma target MCLR EXTERNAL -- external reset -- OSCCON_SCS = 0 -- select primary oscillator OSCCON_IRCF = 0b1110 -- 8 MHz ;OSCCON_SPLLEN = ENABLED -- software PLL on 8x4=32MHz OSCCON_SPLLEN = DISABLED - 8Mhz OSC -- enable_digital_io() -- make all pins digital I/O pin_A4_direction = output ; output osc/4 -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/jallib/CAM%2Bj4qskr5urcQxa_Ok3gHTeq4nMBAtz%2BkmziB4kBf1HBuHCJg%40mail.gmail.com.
