Yep. This is what I also have now. But only after a hard reset. It does works random with internal MCLR. I will replace the chip. However, issue is solved, I think. Thx.
On Mon, Dec 16, 2024, 16:49 Rob Hamerling <[email protected]> wrote: > > Hi Vasili, > > I have no scope on hand. My multimeter (UT61E) has a feature to measure > frequency and duty cycle. > > With Fosc = 8 MHz it shows 2 MHz on the clkout pin and 5 KHz on the PWM1 > pin. > With Fosc = 32 MHz: 8MHz on clkout pin, 20 KHz on PWM1 pin. > > Regards, Rob. > > > On 16-12-2024 07:46, vsurducan wrote: > > > 2. The code below is showing on my scope 10Khz. However I've learned that > depends by antialising filter of the scope. > Can you please take a look on the scope on 20uS time base, on both 8MHz > and 32Mhz Clock? I'm curious what you will find. > > > -- > *Rob H*amerling, Vianen, NL > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion visit > https://groups.google.com/d/msgid/jallib/e1de3c72-755d-4d37-bb51-39a2085f01fc%40gmail.com > <https://groups.google.com/d/msgid/jallib/e1de3c72-755d-4d37-bb51-39a2085f01fc%40gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "jallib" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/jallib/CAM%2Bj4quOPpP1GJLbugOMfc32%3D%2BF0%3D_DJC6U3kJ0Tzr-QKgzn4g%40mail.gmail.com.
