Hi Mike,

Seems like a good addtion. I updated the library with your suggestion. If you 
are OK with it, I will add it to Jallib.

I also added some extra info about the bus speeds.

Kind regards,

Rob

________________________________
Van: 'Mike' via jallib <[email protected]>
Verzonden: zaterdag 28 februari 2026 16:56
Aan: jallib <[email protected]>
Onderwerp: [jallib] Re: I2C software library request

The code should have been this:

procedure  _i2c_wait() is

   if i2c_bus_speed == 255 then
      return
   elsif _i2c_bus_speed == 10 then
      ; i2c_1MHz
      delay_1us()
      return
   elsif _i2c_bus_speed == 4  then
      ; i2c_400kHz
      delay_2us()
      return
   else
      ; i2c_100kHz
      delay_5us()
      return
   end if

end procedure

On Saturday, February 28, 2026 at 10:51:01 AM UTC-5 Mike wrote:
The current I2C software library supports three speeds: 1MHz, 400kHz, and 
100kHz.  But many aftermarket I2C devices can go much faster than that, such as 
the small OLED displays.

Long ago I modified my local copy of the library to support an "unlimited" 
speed and I'm asking that this option be added to jallib.  See below.

Regards,
Mike

procedure  _i2c_wait() is

   if i2c_bus_speed == 255 then
      return
   if _i2c_bus_speed == 10 then
      ; i2c_1MHz
      delay_1us()
      return
   elsif _i2c_bus_speed == 4  then
      ; i2c_400kHz
      delay_2us()
      return
   else
      ; i2c_100kHz
      delay_5us()
      return
   end if

end procedure


--
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
[email protected]<mailto:[email protected]>.
To view this discussion visit 
https://groups.google.com/d/msgid/jallib/5a402fef-1c22-4228-8d65-9caf569c4346n%40googlegroups.com<https://groups.google.com/d/msgid/jallib/5a402fef-1c22-4228-8d65-9caf569c4346n%40googlegroups.com?utm_medium=email&utm_source=footer>.

-- 
You received this message because you are subscribed to the Google Groups 
"jallib" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/jallib/AM0PR02MB40527BE80681CD80F29C3196E670A%40AM0PR02MB4052.eurprd02.prod.outlook.com.

Attachment: i2c_software.jal
Description: i2c_software.jal

Reply via email to