Hi, that means you have missed ipcV library turned on to build. in menuconfig -> Base system -> Service libraries -> Library of IPC containers
Thanks, On Fri, 2010-08-27 at 11:38 +0530, C K Kashyap wrote: > bootstrap went on successfully - > when I did make however, I got this - > [LD] libdrv.so > /home/ckk/lab/JARIOS/jari_os/toolchain/host/bin/amd64-linux-gnu-ld: > cannot find -lipcv > make[1]: *** [libdrv.so] Error 1 > make[1]: Leaving directory `/home/ckk/lab/JARIOS/jari_os/libs/services/libdrv' > make: *** [sys_libs] Error 2 > > > On Thu, Aug 26, 2010 at 11:11 PM, C K Kashyap <[email protected]> wrote: > > Okay ... I downgraded flex to 2.4.35 and make menuconfig went on smoothly. > > I've just fired a make bootstrap and looks like it's gonna take some time. > > > > So, looks like there is some fix needed for it to work with new flex. > > > > Is there a document I can go over to get and architectural overview of > > JARIOS? > > > > > > On Wed, Aug 25, 2010 at 11:39 PM, Alfeiks Kaanoken <[email protected]> > > wrote: > >> On Wed, 2010-08-25 at 23:26 +0530, C K Kashyap wrote: > >>> I made a slight change in sconfig/Makefile > >>> > >>> looks like the flex I have does not like space between -o and the > >>> filename so I changed it to as follows > >>> %.lex.c: %.l > >>> $(Q)$(ECHO) "[FLEX] $^" > >>> $(Q)flex -o$@ $< > >> hmm ... > >>> > >>> And the compilation proceeded to crash at a later point > >>> > >>> [...@windowher-dr jari_os]$ make menuconfig > >>> [HOSTCC] sconfig/lxdialog/checklist.c > >>> [HOSTCC] sconfig/lxdialog/util.c > >>> [HOSTCC] sconfig/lxdialog/inputbox.c > >>> [HOSTCC] sconfig/lxdialog/textbox.c > >>> [HOSTCC] sconfig/lxdialog/yesno.c > >>> [HOSTCC] sconfig/lxdialog/menubox.c > >>> [BISON] sconfig/sconfig.y > >>> [HOSTCC] sconfig/sconfig.tab.c > >>> [FLEX] sconfig/sconfig.l > >>> [HOSTCC] sconfig/sconfig.lex.c > >>> sconfig/sconfig.lex.c:1091: warning: ‘yyunput’ defined but not used > >>> [HOSTCC] sconfig/symbol.c > >>> [HOSTCC] sconfig/confdata.c > >>> [HOSTCC] sconfig/mconf.c > >>> [HOSTLD] sconfig/mconf > >>> sconfig/sconfig.tab.o: In function `parse_config': > >>> /home/ckk/lab/JARIOS/jari_os/sconfig/sconfig.y:180: undefined > >>> reference to `yyset_in' > >>> collect2: ld returned 1 exit status > >>> make[1]: *** [sconfig/mconf] Error 1 > >>> make: *** [menuconfig] Error 2 > >> I guess that you need clean all stuff in sconfig and try again. > >> Let me know what will happens. > >> > >> Thanks, > >>> > >>> > >>> > >>> > >>> On Wed, Aug 25, 2010 at 11:03 PM, C K Kashyap <[email protected]> wrote: > >>> > Thanks for the response ... > >>> > > >>> > my flex version is - flex version 2.5.4 > >>> > > >>> > It is quite strange that make menuconfig works in mustring but not in > >>> > jarios. Please let me know if there is any other information that I > >>> > can provide so that I can move forward. > >>> > > >>> > I am glad to see the response on this mailing list - I was getting a > >>> > little worried after I saw that wikipedia entry about JARIOS has been > >>> > removed. > >>> > > >>> > > >>> > > >>> > On Wed, Aug 25, 2010 at 8:00 PM, Alfeiks Kaanoken <[email protected]> > >>> > wrote: > >>> >> Hi, > >>> >> Could you also give your flex version number ? > >>> >> > >>> >> That's my output - > >>> >> [FLEX] sconfig/sconfig.l > >>> >> [HOSTCC] sconfig/sconfig.lex.c > >>> >> sconfig/sconfig.lex.c:1200: warning: ‘yyunput’ defined but not used > >>> >> sconfig/sconfig.lex.c:1243: warning: ‘input’ defined but not used > >>> >> [HOSTLD] sconfig/mconf > >>> >> > >>> >> and all works fine. > >>> >> > >>> >> Thanks, > >>> >> > >>> >> On Mon, 2010-08-23 at 23:15 +0530, C K Kashyap wrote: > >>> >>> Hi Everybody, > >>> >>> > >>> >>> I came upon JARIOS and it looks pretty interesting. I was able to > >>> >>> build muistring successfully and was also able to build the image and > >>> >>> boot with qemu. > >>> >>> > >>> >>> However, when I tried to build jari_os, I ran into an issue - > >>> >>> > >>> >>> [u...@kashyap jari_os]$ make menuconfig > >>> >>> [HOSTCC] sconfig/lxdialog/checklist.c > >>> >>> [HOSTCC] sconfig/lxdialog/util.c > >>> >>> [HOSTCC] sconfig/lxdialog/inputbox.c > >>> >>> [HOSTCC] sconfig/lxdialog/textbox.c > >>> >>> [HOSTCC] sconfig/lxdialog/yesno.c > >>> >>> [HOSTCC] sconfig/lxdialog/menubox.c > >>> >>> [BISON] sconfig/sconfig.y > >>> >>> [HOSTCC] sconfig/sconfig.tab.c > >>> >>> [FLEX] sconfig/sconfig.l > >>> >>> flex: can't open sconfig/sconfig.lex.c > >>> >>> make[1]: *** [sconfig/sconfig.lex.c] Error 1 > >>> >>> make: *** [menuconfig] Error 2 > >>> >>> > >>> >>> > >>> >>> What do I need to get around this? > >>> >>> > >>> >> -- > >>> >> Alfeiks Kaanoken, > >>> >> Team Lead/Project Founder > >>> >> of the Jari OS project. > >>> >> http://jarios.org > >>> >> > >>> >> > >>> > > >>> > > >>> > > >>> > -- > >>> > Regards, > >>> > Kashyap > >>> > > >>> > >>> > >>> > >> -- > >> Alfeiks Kaanoken, > >> Team Lead/Project Founder > >> of the Jari OS project. > >> http://jarios.org > >> > >> > > > > > > > > -- > > Regards, > > Kashyap > > > > > -- Alfeiks Kaanoken, Team Lead/Project Founder of the Jari OS project. http://jarios.org _______________________________________________ Jarios-dev mailing list [email protected] http://lists.jarios.org/cgi-bin/mailman/listinfo/jarios-dev
