----------------------------------------------------------------
BEFORE YOU POST, search the faq at <http://java.apache.org/faq/>
WHEN YOU POST, include all relevant version numbers, log files,
and configuration files. Don't make us guess your problem!!!
----------------------------------------------------------------
Thank you, that did the trick! I should add that on
Mandrake 6.1, you must first forcibly uninstall the
following obsoleted packages:
glibc-2.1.1-16mdk
glibc-devel-2.1.1-16mdk
I think the command was rpm --erase --nodeps
<package-name>. Then I could install the packages you so
kindly listed for me.
Travis
[EMAIL PROTECTED] wrote:
>
> I think I have posted the solution before, and I concluded that the
> IBMJDK118 does not work with the glibc come with Mandrake 6.1. Try go
>
> ftp://rpmfind.net/linux/MandrakeCooker/cooker/Mandrake/RPMS/
>
> and get:
> glibc-2.1.2-8mdk.i586.rpm
> glibc-devel-2.1.2-8mdk.i586.rpm
> glibc-profile-2.1.2-8mdk.i586.rpm
>
> to upgrade your glibc.
>
> Your problem should be solved.
>
> Punky Tse
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Travis Low
> Sent: Tuesday, November 23, 1999 12:10 PM
> To: [EMAIL PROTECTED]
> Subject: Help! Can't configure jserv1.1b3/apache1.3.9
>
> ----------------------------------------------------------------
> BEFORE YOU POST, search the faq at <http://java.apache.org/faq/>
> WHEN YOU POST, include all relevant version numbers, log files,
> and configuration files. Don't make us guess your problem!!!
> ----------------------------------------------------------------
>
> Desperately trying to configure JServ 1.1b3 with Apache
> 1.3.9, running on Mandrake 6.1. Using IBM's JDK-1.1.8.
> It might be easier for everyone if someone with the same
> setup would just send me their configuration files, and I'll
> compare them and see where I've gone wrong.
>
> The problem: Nothing works. In addition, after starting
> apache with the command "/usr/lib/apache/bin/apachectl
> start", the following messages are periodically appended to
> /usr/lib/apache/logs/mod_jserv.log (timestamps removed):
>
> (INFO) wrapper: Java VM spawned (PID=21777, PPID=21769)
> (INFO) wrapper: watching processes (PID=21769,PPID=21768,JVM
> PID=21777)
> (EMERGENCY) ajp12: can not connect to host 127.0.0.1:8007
> (EMERGENCY) ajp12: function connection fail
> (INFO) wrapper: Java VM is not responding (PID=21769)
> (INFO) wrapper: Java VM restarting (PID=21769)
>
> Every so many restarts, the following is appended to
> /usr/lib/apache/logs/mod_jserv.log:
>
> (ERROR) wrapper: printing debugging information (command
> line, env)
> (ERROR) wrapper: argument[ 0] /usr/local/java/bin/java
> (ERROR) wrapper: argument[ 1] org.apache.jserv.JServ
> (ERROR) wrapper: argument[ 2]
> /usr/lib/apache/conf/jserv/jserv.properties
> (ERROR) wrapper: environment[ 0]
> CLASSPATH=/usr/local/java/classes:/usr/local/java/lib/classes.zip:/usr/lib/a
> pache/libexec/ApacheJServ.jar:/usr/local/jsdk/lib/jsdk.jar
> (INFO) wrapper: Java VM died 10 times in a row with less
> than 120 seconds between successive failures, setting delay
> to 300 seconds before restarting. Check the Apache error log
> and the Apache JServ log files for more details; for maximum
> log information be sure to enable the Apache JServ log file
> in the main jserv properties file by: setting the 'log'
> property to true, the 'log.file' property to a file
> writable by the uid as whom Apache JServ is run, and by
> enabling log channels using the 'log.channel.*' properties)
> (INFO) wrapper: Java VM restarting (PID=21937)
>
> I've appended my configuration and log files. I hope the
> length is not offensive. Anything else you need to see,
> just ask. I have installation transcripts, if that's
> relevant.
>
> I have read through the FAQ (especially the page at
> http://java.apache.org/faq/fom-serve/cache/222.html ), so
> either I'm missing something or the answer isn't there.
> Please help! This is making me nuts. I'd like to get away
> from system administration and into servlet development!
> =) Thanks in advance.
>
> --Travis
> <[EMAIL PROTECTED]>
> <http://dawnstar.org/travis>
>
> ############################################################################
> ###
> # Apache JServ Configuration
> File #
> ############################################################################
> ###
>
> # Note: this file should be appended or included into your
> httpd.conf
>
> # Tell Apache on win32 to load the Apache JServ
> communication module
> #LoadModule jserv_module modules/ApacheModuleJServ.dll
>
> # Tell Apache on Unix to load the Apache JServ communication
> module
> # For shared object builds only!!!
> LoadModule jserv_module /usr/lib/apache/libexec/mod_jserv.so
>
> <IfModule mod_jserv.c>
>
> # Whether Apache must start Apache JServ or not (On=Manual
> Off=Autostart)
> # Syntax: ApJServManual [on/off]
> # Default: "Off"
> ApJServManual off
>
> # Properties filename for Apache JServ in Automatic Mode.
> # In manual mode this directive is ignored
> # Syntax: ApJServProperties [filename]
> # Default: "./conf/jserv.properties"
> ApJServProperties
> /usr/lib/apache/conf/jserv/jserv.properties
>
> # Log file for this module operation relative to Apache root
> directory.
> # Set the name of the trace/log file. To avoid possible
> confusion about
> # the location of this file, an absolute pathname is
> recommended.
> #
> # This log file is different than the log file that is in
> the
> # jserv.properties file. This is the log file for the C
> portion of Apache
> # JServ.
> #
> # On Unix, this file must have write permissions by the
> owner of the JVM
> # process. In other words, if you are running Apache JServ
> in manual mode
> # and Apache is running as user nobody, then the file must
> have its
> # permissions set so that that user can write to it.
> # Syntax: ApJServLogFile [filename]
> # Default: "./logs/mod_jserv.log"
> # Note: when set to "DISABLED", the log will be redirected
> to Apache error log
> ApJServLogFile /usr/lib/apache/logs/mod_jserv.log
>
> # Log Level for this module
> # Syntax: ApJServLogLevel
> [debug|info|notice|warn|error|crit|alert|emerg]
> # Default: info (unless compiled w/ JSERV_DEBUG, in which
> case it's debug)
> ApJServLogLevel debug
>
> # Protocol used by this host to connect to Apache JServ
> # (see documentation for more details on available
> protocols)
> # Syntax: ApJServDefaultProtocol [name]
> # Default: "ajpv12"
> ApJServDefaultProtocol ajpv12
>
> # Default host on which Apache JServ is running
> # Syntax: ApJServDefaultHost [hostname]
> # Default: "localhost"
> ApJServDefaultHost 127.0.0.1
>
> # Default port that Apache JServ is listening to
> # Syntax: ApJServDefaultPort [number]
> # Default: protocol-dependant (for ajpv12 protocol this is
> "8007")
> ApJServDefaultPort 8007
>
> # The amount of time to give to the JVM to start up as well
> # as the amount of time to wait to ping the JVM to see if it
> # is alive. Slow or heavily loaded machines might want to
> # increase this value.
> # Default: 10 seconds
> # ApJServVMTimeout 10
>
> # Passes parameter and value to specified protocol.
> # Syntax: ApJServProtocolParameter [name] [parameter]
> [value]
> # Default: NONE
> # Note: Currently no protocols handle this. Introduced for
> future protocols.
>
> # Apache JServ secret key file relative to Apache root
> directory.
> # Syntax: ApJServSecretKey [filename]
> # Default: "./conf/jserv.secret.key"
> # Warning: if authentication is DISABLED, everyone on this
> machine (not just
> # this module) may connect to your servlet engine and
> execute servlet
> # bypassing web server restrictions. See the documentation
> for more information
> #ApJServSecretKey
> /usr/lib/apache/conf/jserv/jserv.secret.key
> ApJServSecretKey DISABLED
>
> # Mount point for Servlet zones
> # (see documentation for more information on servlet zones)
> # Syntax: ApJServMount [name] [jserv-url]
> # Default: NONE
> # Note: [name] is the name of the Apache URI path to mount
> jserv-url on
> # [jserv-url] is something like
> "protocol://host:port/zone"
> # If protocol, host or port are not specified, the values
> from
> # "ApJServDefaultProtocol", "ApJServDefaultHost" or
> "ApJServDefaultPort"
> # will be used.
> # If zone is not specified, the zone name will be the first
> subdirectory of
> # the called servlet.
> # Example: "ApJServMount /servlets /myServlets"
> # if user requests "http://host/servlets/TestServlet"
> # the servlet "TestServlet" in zone "myServlets" on default
> host
> # thru default protocol on defaul port will be requested
> # Example: "ApJServMount /servlets ajpv12://localhost:8007"
> # if user requests
> "http://host/servlets/myServlets/TestServlet"
> # the servlet "TestServlet" in zone "myServlets" will be
> requested
> # Example: "ApJServMount /servlets
> ajpv12://jserv.mydomain.com:15643/myServlets"
> # if user requests "http://host/servlets/TestServlet" the
> servlet
> # "TestServlet" in zone "myServlets" on host
> "jserv.mydomain.com" using
> # "ajpv12" protocol on port "15643" will be executed
> ApJServMount /servlets /root
> ApJServMount /servlet /root
>
> # Whether <VirtualHost> inherits base host mount points or
> not
> # Syntax: ApJServMountCopy [on/off]
> # Default: "On"
> # Note: This directive is meaninful only when virtual hosts
> are being used
> ApJServMountCopy on
>
> # Executes a servlet passing filename with proper extension
> in PATH_TRANSLATED
> # property of servlet request.
> # Syntax: ApJServAction [extension] [servlet-uri]
> # Defaults: NONE
> # Notes: This is used for external tools.
> #ApJServAction .jsp /servlets/org.gjt.jsp.JSPServlet
> #ApJServAction .gsp /servlets/com.bitmechanic.gsp.GspServlet
> #ApJServAction .jhtml /servlets/org.apache.servlet.ssi.SSI
> #ApJServAction .xml /servlets/org.apache.cocoon.Cocoon
>
> # Enable the Apache JServ status handler with the URL of
> # "http://servername/jserv/" (note the trailing slash!)
> # Change the "deny" directive to restrict access to this
> status page.
> <Location /jserv/>
> SetHandler jserv-status
>
> order deny,allow
> deny from all
> allow from localhost 127.0.0.1
> </Location>
>
> ############################## W A R N I N G
> ##################################
> # Remember to disable or otherwise protect the execution of
> the Apache JServ #
> # Status Handler (see right above) on a production
> environment since this may #
> # give untrusted users the ability to obtain restricted
> information on your #
> # servlets and their initialization arguments such as JDBC
> passwords and #
> # other important information. The Apache JServ Status
> Handler should be #
> # accessible only by system
> administrators. #
> ############################################################################
> ###
>
> </IfModule>
>
> ############################################################################
> ###
> # Apache JServ Configuration
> File #
> ############################################################################
> ###
>
> ################################ W A R N I N G
> ################################
> # Unlike normal Java properties, JServ configurations have
> some important
> # extentions:
> #
> # 1) commas are used as token separators
> # 2) multiple definitions of the same key are
> concatenated in a
> # comma-separated list.
> ############################################################################
> ###
>
> #
> # Execution parameters
> #######################
>
> # The Java Virtual Machine interpreter.
> # Syntax: wrapper.bin=[filename] (String)
> # Note: specify a full path if the interpreter is not
> visible in your path.
> wrapper.bin=/usr/local/java/bin/java
>
> # Arguments passed to Java interpreter (optional)
> # Syntax: wrapper.bin.parameters=[parameters] (String)
> # Default: NONE
>
> # Apache JServ entry point class (should not be changed)
> # Syntax: wrapper.class=[classname] (String)
> # Default: "org.apache.jserv.JServ"
>
> # Arguments passed to main class after the properties
> filename (not used)
> # Syntax: wrapper.class.parameters=[parameters] (String)
> # Default: NONE
> # Note: currently not used
>
> # PATH environment value passed to the JVM
> # Syntax: wrapper.path=[path] (String)
> # Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
> # "c:\(windows-dir);c:\(windows-system-dir)" for
> Win32 systems
> # Notes: if more than one line is supplied these will be
> concatenated using
> # ":" or ";" (depending wether Unix or Win32)
> characters
> # Under Win32 (windows-dir) and (windows-system-dir)
> will be
> # automatically evaluated to match your system
> requirements
> wrapper.path=/bin
> wrapper.path=/usr/bin
> wrapper.path=/usr/local/bin
> wrapper.path=/usr/local/java/bin
>
> # CLASSPATH environment value passed to the JVM
> # Syntax: wrapper.classpath=[path] (String)
> # Default: NONE (Sun's JDK/JRE already have a default
> classpath)
> # Note: if more than one line is supplied these will be
> concatenated using
> # ":" or ";" (depending wether Unix or Win32)
> characters. JVM must be
> # able to find JSDK and JServ classes and any utility
> classes used by
> # your servlets.
> # Note: the classes you want to be automatically reloaded
> upon modification
> # MUST NOT be in this classpath or the classpath of
> the shell
> # you start the Apache from.
> #
> wrapper.classpath=/usr/local/java/classes
> wrapper.classpath=/usr/local/java/lib/classes.zip
> wrapper.classpath=/usr/lib/apache/libexec/ApacheJServ.jar
> wrapper.classpath=/usr/local/jsdk/lib/jsdk.jar
>
> # An environment name with value passed to the JVM
> # Syntax: wrapper.env=[name]=[value] (String)
> # Default: NONE on Unix Systems
> # SystemDrive and SystemRoot with appropriate
> values on Win32 systems
>
> # An environment name with value copied from caller to Java
> Virtual Machine
> # Syntax: wrapper.env.copy=[name] (String)
> # Default: NONE
>
> # Copies all environment from caller to Java Virtual Machine
> # Syntax: wrapper.env.copyall=[true|false] (boolean)
> # Default: false
>
> # Protocol used for signal handling
> # Syntax: wrapper.protocol=[name] (String)
> # Default: ajpv12
>
> #
> # General parameters
> ######################
>
> # Set the default IP address or hostname Apache JServ binds
> (or listens) to.
> #
> # If you have a machine with multiple IP addresses, this
> address
> # will be the one used. If you set the value to localhost,
> it
> # will be resolved to the IP address configured for the
> locahost
> # on your system (generally this is 127.0.0.1). This feature
> is so
> # that one can have multiple instances of Apache JServ
> listening on
> # the same port number, but different IP addresses on the
> same machine.
> #
> # Syntax: bindaddress=[ipaddress] or [localhost]
> # Default: localhost
> bindaddress=127.0.0.1
>
> # Set the port Apache JServ listens to.
> # Syntax: port=[1024,65535] (int)
> # Default: 8007
> port=8007
>
> #
> # Servlet Zones parameters
> ###########################
>
> # List of servlet zones Apache JServ manages
> # Syntax: zones=[servlet zone],[servlet zone]... (Comma
> separated list of String)
> # Default: NONE
> zones=root
>
> # Configuration file for each servlet zone (one per servlet
> zone)
> # Syntax: [servlet zone name as on the zones
> list].properties=[full path to configFile] (String)
> # Default: NONE
> # Note: if the file could not be opened, try using absolute
> paths.
> root.properties=/usr/lib/apache/conf/jserv/zone.properties
>
> #
> # Thread Pool parameters
> #########################
>
> # Enables or disables the use of the thread pool.
> # Syntax: pool=[true|false] (boolean)
> # Default: false
> # WARNING: the pool has not been extensively tested and may
> generate deadlocks.
> # For this reason, we advise against using this code in
> production environments.
> pool=false
>
> # Indicates the number of idle threads that the pool may
> contain.
> # Syntax: pool.capacity=(int)>0
> # Default: 10
> # NOTE: depending on your system load, this number should be
> low for contantly
> # loaded servers and should be increased depending on load
> bursts.
> pool.capacity=10
>
> # Indicates the pool controller that should be used to
> control the
> # level of the recycled threads.
> # Syntax: pool.controller=[full class of controller]
> (String)
> # Default: org.apache.java.recycle.DefaultController
> # NOTE: it is safe to leave this unchanged unless special
> recycle behavior
> # is needed. Look at the "org.apache.java.recycle" package
> javadocs for more
> # info on other pool controllers and their behavior.
> pool.controller=org.apache.java.recycle.DefaultController
>
> #
> # Security parameters
> #####################
>
> # Enable/disable the execution of org.apache.jserv.JServ as
> a servlet.
> # This is disabled by default because it may give
> informations that should
> # be restricted.
> # Note that the execution of Apache JServ as a servlet is
> filtered by the web
> # server modules by default so that both sides should be
> enabled to let this
> # service work.
> # This service is useful for installation and configuration
> since it gives
> # feedback about the exact configurations Apache JServ is
> using, but it should
> # be disabled when both installation and configuration
> processes are done.
> # Syntax: security.selfservlet=[true|false] (boolean)
> # Default: false
> # WARNING: disable this in a production environment since
> may give reserved
> # information to untrusted users.
> security.selfservlet=true
>
> # Set the maximum number of socket connections Apache JServ
> may handle
> # simultaneously. Make sure your operating environment has
> enough file
> # descriptors to allow this number.
> # Syntax: security.maxConnections=(int)>1
> # Default: 50
> security.maxConnections=50
>
> # Backlog setting for very fine performance tunning of
> JServ.
> # Unless you are familiar to sockets leave this value
> commented out.
> # security.backlog=5
>
> # List of IP addresses allowed to connect to Apache JServ.
> This is a first
> # security filtering to reject possibly unsecure connections
> and avoid the
> # overhead of connection authentication.
> # Syntax: security.allowedAddresses=[IP address],[IP
> Address]... (Comma separated list of IP
> addresses)
> # Default: 127.0.0.1
> security.allowedAddresses=127.0.0.1
>
> # Enable/disable connection authentication.
> # NOTE: unauthenticated connections are a little faster
> since authentication
> # handshake is not performed at connection creation.
> # WARNING: authentication is disabled by default because we
> believe that
> # connection restriction from all IP addresses but localhost
> reduces your
> # time to get Apache JServ to run. If you allow other
> addresses to connect and
> # you don't trust it, you should enable authentication to
> prevent untrusted
> # execution of your servlets. Beware: if authentication is
> disabled and the
> # IP address is allowed, everyone on that machine can
> execute your servlets!
> # Syntax: security.authentication=[true,false] (boolean)
> # Default: true
> security.authentication=false
>
> # Authentication secret key.
> # The secret key is passed as a file that must be kept
> secure and must
> # be exactly the same of those used by clients to
> authenticate themselves.
> # Syntax: security.secretKey=[secret key path and filename]
> (String)
> # Default: NONE
> # Note: if the file could not be opened, try using absolute
> paths.
> #security.secretKey=/usr/lib/apache/conf/jserv/jserv.secret.key
>
> # Length of the randomly generated challenge string (in
> bytes) used to
> # authenticate connections. 5 is the lowest possible choice
> to force a safe
> # level of security and reduce connection creation overhead.
> # Syntax: security.challengeSize=(int)>5
> # Default: 5
> #security.challengeSize=5
>
> #
> # Logging parameters
> ####################
>
> # Enable/disable Apache JServ logging.
> # WARNING: logging is a very expensive operation in terms of
> performance. You
> # should reduced the generated log to a minumum or even
> disable it if fast
> # execution is an issue. Note that if all log channels (see
> below) are
> # enabled, the log may become really big since each servlet
> request may
> # generate many Kb of log. Some log channels are mainly for
> debugging
> # purposes and should be disabled in a production
> environment.
> # Syntax: log=[true,false] (boolean)
> # Default: true
> log=true
>
> # Set the name of the trace/log file. To avoid possible
> confusion about
> # the location of this file, an absolute pathname is
> recommended.
> #
> # This log file is different than the log file that is in
> the
> # jserv.conf file. This is the log file for the Java portion
> of Apache
> # JServ.
> #
> # On Unix, this file must have write permissions by the
> owner of the JVM
> # process. In other words, if you are running Apache JServ
> in manual mode
> # and Apache is running as user nobody, then the file must
> have its
> # permissions set so that that user can write to it.
> # Syntax: log.file=[log path and filename] (String)
> # Default: NONE
> # Note: if the file could not be opened, try using absolute
> paths.
> log.file=/usr/lib/apache/logs/jserv.log
>
> # Enable the timestamp before the log message
> # Syntax: log.timestamp=[true,false] (boolean)
> # Default: true
> log.timestamp=true
>
> # Use the given string as a data format
> # (see java.text.SimpleDateFormat for the list of options)
> # Syntax: log.dateFormat=(String)
> # Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
> log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
>
> # Since all the messages logged are processed by a thread
> running with
> # minimum priority, it's of vital importance that this
> thread gets a chance
> # to run once in a while. If it doesn't, the log queue
> overflow occurs,
> # usually resulting in the OutOfMemoryError.
> #
> # To prevent this from happening, two parameters are used:
> log.queue.maxage
> # and log.queue.maxsize. The former defines the maximum time
> for the logged
> # message to stay in the queue, the latter defines maximum
> number of
> # messages in the queue.
> #
> # If one of those conditions becomes true (age > maxage ||
> size > maxsize),
> # the log message stating that fact is generated and the log
> queue is
> # flushed in the separate thread.
> #
> # If you ever see such a message, either your system doesn't
> live up to its
> # expectations or you have a runaway loop (probably, but not
> necessarily,
> # generating a lot of log messages).
> #
> # WARNING: Default values are lousy, you probably want to
> tweak them and
> # report the results back to the development team.
>
> # Syntax: log.queue.maxage = [milliseconds]
> # Default: 5000
> log.queue.maxage = 5000
>
> # Syntax: log.queue.maxsize = [integer]
> # Default: 1000
> log.queue.maxsize = 1000
>
> # Enable/disable logging the channel name
> # Default: false
> # log.channel=false
>
> # Enable/disable channels, each logging different actions.
> # Syntax: log.channel.[channel name]=[true,false] (boolean)
> # Default: false
>
> # Info channel - quite a lot of informational messages
> # hopefully you don't need them under normal circumstances
> log.channel.info=true
>
> # Servlets exception, i.e. exception caught during
> # servlet.service() processing are monitored here
> # you probably want to have this one switched on
> log.channel.servletException=true
>
> # JServ exception, caught internally in jserv
> # we suggest to leave it on
> log.channel.jservException=true
>
> # Warning channel, it catches all the important
> # messages that don't cause JServ to stop, leave it on
> log.channel.warning=true
>
> # Servlet log
> # All messages logged by servlets. Probably you want
> # this one to be switched on.
> log.channel.servletLog=true
>
> # Critical errors
> # Messages produced by critical events causing jserv to stop
> log.channel.critical=true
>
> # Debug channel
> # Only for internal debugging purposes
> # log.channel.debug=true
>
> [Mon Nov 22 23:01:50 1999] [info] created shared memory
> segment #3712
> [Mon Nov 22 23:01:50 1999] [notice] Apache/1.3.9 (Unix)
> ApacheJServ/1.1b3 configured -- resuming
> normal operations
> [Mon Nov 22 23:01:50 1999] [info] Server built: Nov 22 1999
> 21:19:26
>
> [22/11/1999 23:01:50:798] (INFO) Apache Module was
> cleaned-up
> [22/11/1999 23:01:53:824] (INFO) wrapper classpath:
> /usr/local/java/classes:/usr/local/java/lib/classes.zip:/usr/lib/apache/libe
> xec/ApacheJServ.jar:/usr/local/jsdk/lib/jsdk.jar
> [22/11/1999 23:01:53:824] (INFO) wrapper: Java VM spawned
> (PID=22235, PPID=22229)
> [22/11/1999 23:02:03:831] (INFO) wrapper: watching processes
> (PID=22229,PPID=22228,JVM PID=22235)
> [22/11/1999 23:02:03:831] (EMERGENCY) ajp12: can not connect
> to host 127.0.0.1:8007
> [22/11/1999 23:02:03:831] (EMERGENCY) ajp12: function
> connection fail
> [22/11/1999 23:02:03:831] (INFO) wrapper: Java VM is not
> responding (PID=22229)
> [22/11/1999 23:02:08:881] (INFO) wrapper: Java VM restarting
> (PID=22229)
> [22/11/1999 23:02:08:881] (INFO) wrapper: Java VM spawned
> (PID=22246, PPID=22229)
> [22/11/1999 23:02:21:901] (EMERGENCY) ajp12: can not connect
> to host 127.0.0.1:8007
> [22/11/1999 23:02:21:901] (EMERGENCY) ajp12: function
> connection fail
> [22/11/1999 23:02:21:901] (INFO) wrapper: Java VM is not
> responding (PID=22229)
> [22/11/1999 23:02:26:951] (INFO) wrapper: Java VM restarting
> (PID=22229)
> [22/11/1999 23:02:26:955] (INFO) wrapper: Java VM spawned
> (PID=22257, PPID=22229)
> [22/11/1999 23:02:39:971] (EMERGENCY) ajp12: can not connect
> to host 127.0.0.1:8007
> [22/11/1999 23:02:39:971] (EMERGENCY) ajp12: function
> connection fail
> [22/11/1999 23:02:39:971] (INFO) wrapper: Java VM is not
> responding (PID=22229)
> [22/11/1999 23:02:45:021] (INFO) wrapper: Java VM restarting
> (PID=22229)
> [22/11/1999 23:02:45:021] (INFO) wrapper: Java VM spawned
> (PID=22268, PPID=22229)
> [22/11/1999 23:02:58:041] (EMERGENCY) ajp12: can not connect
> to host 127.0.0.1:8007
> [22/11/1999 23:02:58:041] (EMERGENCY) ajp12: function
> connection fail
> [22/11/1999 23:02:58:041] (INFO) wrapper: Java VM is not
> responding (PID=22229)
> [22/11/1999 23:03:03:091] (INFO) wrapper: Java VM restarting
> (PID=22229)
> [22/11/1999 23:03:03:091] (INFO) wrapper: Java VM spawned
> (PID=22279, PPID=22229)
> [22/11/1999 23:03:16:111] (EMERGENCY) ajp12: can not connect
> to host 127.0.0.1:8007
> [22/11/1999 23:03:16:111] (EMERGENCY) ajp12: function
> connection fail
> [22/11/1999 23:03:16:111] (INFO) wrapper: Java VM is not
> responding (PID=22229)
> [22/11/1999 23:03:21:161] (ERROR) wrapper: printing
> debugging information (command line, env)
> [22/11/1999 23:03:21:161] (ERROR) wrapper: argument[ 0]
> /usr/local/java/bin/java
> [22/11/1999 23:03:21:161] (ERROR) wrapper: argument[ 1]
> org.apache.jserv.JServ
> [22/11/1999 23:03:21:161] (ERROR) wrapper: argument[ 2]
> /usr/lib/apache/conf/jserv/jserv.properties
> [22/11/1999 23:03:21:161] (ERROR) wrapper: environment[ 0]
> CLASSPATH=/usr/local/java/classes:/usr/local/java/lib/classes.zip:/usr/lib/a
> pache/libexec/ApacheJServ.jar:/usr/local/jsdk/lib/jsdk.jar
> [22/11/1999 23:03:21:161] (ERROR) wrapper: environment[ 1]
> PATH=/bin:/usr/bin:/usr/local/bin:/usr/local/java/bin:/bin:/usr/bin:/usr/loc
> al/bin
> [22/11/1999 23:03:21:161] (INFO) wrapper: Java VM died 5
> times in a row with less than 120 seconds
> between successive failures, setting delay to 60 seconds
> before restarting. Check the Apache error log
> and the Apache JServ log files for more details; for maximum
> log information be sure to enable the
> Apache JServ log file in the main jserv properties file by:
> setting the 'log' property to true, the
> 'log.file' property to a file writable by the uid as whom
> Apache JServ is run, and by enabling log
> channels using the 'log.channel.*' properties)
> [22/11/1999 23:04:06:311] (INFO) wrapper: Java VM restarting
> (PID=22229)
> [22/11/1999 23:04:06:311] (INFO) wrapper: Java VM spawned
> (PID=22290, PPID=22229)
> [22/11/1999 23:04:19:331] (EMERGENCY) ajp12: can not connect
> to host 127.0.0.1:8007
> [22/11/1999 23:04:19:331] (EMERGENCY) ajp12: function
> connection fail
> [22/11/1999 23:04:19:331] (INFO) wrapper: Java VM is not
> responding (PID=22229)
>
> --
> --------------------------------------------------------------
> Please read the FAQ! <http://java.apache.org/faq/>
> To subscribe: [EMAIL PROTECTED]
> To unsubscribe: [EMAIL PROTECTED]
> Archives and Other: <http://java.apache.org/main/mail.html>
> Problems?: [EMAIL PROTECTED]
>
> --
> --------------------------------------------------------------
> Please read the FAQ! <http://java.apache.org/faq/>
> To subscribe: [EMAIL PROTECTED]
> To unsubscribe: [EMAIL PROTECTED]
> Archives and Other: <http://java.apache.org/main/mail.html>
> Problems?: [EMAIL PROTECTED]
-- Travis Low
<mailto:[EMAIL PROTECTED]>
<http://dawnstar.org/travis>
--
--------------------------------------------------------------
Please read the FAQ! <http://java.apache.org/faq/>
To subscribe: [EMAIL PROTECTED]
To unsubscribe: [EMAIL PROTECTED]
Archives and Other: <http://java.apache.org/main/mail.html>
Problems?: [EMAIL PROTECTED]
