---------------------------------------------------------------- BEFORE YOU POST, search the faq at <http://java.apache.org/faq/> WHEN YOU POST, include all relevant version numbers, log files, and configuration files. Don't make us guess your problem!!! ---------------------------------------------------------------- Sorry if this is really simple (I hope) but I am relatively new to this... I installed Apache 1.3.12 and JServ 1.1 under Solaris 7. When I run IsItRunning, everything works great. When I run my own servlets I get: [27/03/2000 14:15:08:597] (EMERGENCY) ajp12[1]: cannot scan servlet headers (500) [27/03/2000 14:15:08:598] (ERROR) an error returned handling request via protocol "ajpv12" I saw something like this in the FAQ but it didn't make much sense to me. Attached are my conf files. Any help would be greatly appreciated. -Jeff ## ## httpd.conf -- Apache HTTP server configuration file ## # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://www.apache.org/docs/> for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # After this file is processed, the server will look for and process # /export/apps/apache/conf/srm.conf and then /export/apps/apache/conf/access.conf # unless you have overridden these with ResourceConfig and/or # AccessConfig directives here. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "/usr/local/apache" will be interpreted by the # server as "/usr/local/apache/logs/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerType is either inetd, or standalone. Inetd mode is only supported on # Unix platforms. # ServerType standalone # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/export/apps/apache" # # The LockFile directive sets the path to the lockfile used when Apache # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at # its default value. The main reason for changing it is if the logs # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL # DISK. The PID of the main server process is automatically appended to # the filename. # #LockFile /export/apps/apache/logs/httpd.lock # # PidFile: The file in which the server should record its process # identification number when it starts. # PidFile /export/apps/apache/logs/httpd.pid # # ScoreBoardFile: File used to store internal server process information. # Not all architectures require this. But if yours does (you'll know because # this file will be created when you run Apache) then you *must* ensure that # no two invocations of Apache share the same scoreboard file. # ScoreBoardFile /export/apps/apache/logs/httpd.scoreboard # # In the standard configuration, the server will process this file, # srm.conf, and access.conf in that order. The latter two files are # now distributed empty, as it is recommended that all directives # be kept in a single file for simplicity. The commented-out values # below are the built-in defaults. You can have the server ignore # these files altogether by using "/dev/null" (for Unix) or # "nul" (for Win32) for the arguments to the directives. # #ResourceConfig conf/srm.conf #AccessConfig conf/access.conf # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 # # Server-pool size regulation. Rather than making you guess how many # server processes you need, Apache dynamically adapts to the load it # sees --- that is, it tries to maintain enough server processes to # handle the current load, plus a few spare servers to handle transient # load spikes (e.g., multiple simultaneous requests from a single # Netscape browser). # # It does this by periodically checking how many servers are waiting # for a request. If there are fewer than MinSpareServers, it creates # a new spare. If there are more than MaxSpareServers, some of the # spares die off. The default values are probably OK for most sites. # MinSpareServers 5 MaxSpareServers 10 # # Number of servers to start initially --- should be a reasonable ballpark # figure. # StartServers 5 # # Limit on total number of servers running, i.e., limit on the number # of clients who can simultaneously connect --- if this limit is ever # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. # It is intended mainly as a brake to keep a runaway server from taking # the system with it as it spirals down... # MaxClients 150 # # MaxRequestsPerChild: the number of requests each child process is # allowed to process before the child dies. The child will exit so # as to avoid problems after prolonged use when Apache (and maybe the # libraries it uses) leak memory or other resources. On most systems, this # isn't really needed, but a few (such as Solaris) do have notable leaks # in the libraries. For these platforms, set to something like 10000 # or so; a setting of 0 means unlimited. # # NOTE: This value does not include keepalive requests after the initial # request per connection. For example, if a child process handles # an initial request and 10 subsequent "keptalive" requests, it # would only count as 1 request towards this limit. # MaxRequestsPerChild 0 # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, in addition to the default. See also the <VirtualHost> # directive. # #Listen 3000 #Listen 12.34.56.78:80 # # BindAddress: You can support virtual hosts with this option. This directive # is used to tell the server which IP address to listen to. It can either # contain "*", an IP address, or a fully qualified Internet domain name. # See also the <VirtualHost> and Listen directives. # #BindAddress * # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Please read the file README.DSO in the Apache 1.3 distribution for more # details about the DSO mechanism and run `httpd -l' for the list of already # built-in (statically linked and thus always available) modules in your httpd # binary. # # Note: The order is which modules are loaded is important. Don't change # the order below without expert advice. # # Example: # LoadModule foo_module libexec/mod_foo.so LoadModule rewrite_module libexec/mod_rewrite.so # Reconstruction of the complete module list from all available modules # (static and shared ones) to achieve correct module execution order. # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] ClearModuleList AddModule mod_env.c AddModule mod_log_config.c AddModule mod_mime.c AddModule mod_negotiation.c AddModule mod_status.c AddModule mod_include.c AddModule mod_autoindex.c AddModule mod_dir.c AddModule mod_cgi.c AddModule mod_asis.c AddModule mod_imap.c AddModule mod_actions.c AddModule mod_userdir.c AddModule mod_alias.c AddModule mod_rewrite.c AddModule mod_access.c AddModule mod_auth.c AddModule mod_so.c AddModule mod_setenvif.c # # ExtendedStatus controls whether Apache will generate "full" status # information (ExtendedStatus On) or just basic information (ExtendedStatus # Off) when the "server-status" handler is called. The default is Off. # ExtendedStatus On ### Section 2: 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # If your ServerType directive (set earlier in the 'Global Environment' # section) is set to "inetd", the next few directives don't have any # effect since their settings are defined by the inetd configuration. # Skip ahead to the ServerAdmin directive. # # # Port: The port to which the standalone server listens. For # ports < 1023, you will need httpd to be run as root initially. # Port 9090 # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # . On SCO (ODT 3) use "User nouser" and "Group nogroup". # . On HPUX you may not be able to use shared memory as nobody, and the # suggested workaround is to create a user www and use that user. # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) # when the value of (unsigned)Group is above 60000; # don't use Group nobody on these systems! # User nobody Group nobody # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. # ServerAdmin [EMAIL PROTECTED] # # ServerName allows you to set a host name which is sent back to clients for # your server if it's different than the one the program would get (i.e., use # "www" instead of the host's real name). # # Note: You cannot just invent host names and hope they work. The name you # define here must be a valid DNS name for your host. If you don't understand # this, ask your network administrator. # If your host doesn't have a registered DNS name, enter its IP address here. # You will have to access it by its address (e.g., http://123.45.67.89/) # anyway, and this will make redirections work in a sensible way. # ServerName 48.10.113.224 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/export/apps/apache/htdocs" # # Each directory to which Apache has access, can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # permissions. # <Directory /> Options FollowSymLinks AllowOverride None </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/export/apps/apache/htdocs"> # # This may also be "None", "All", or any combination of "Indexes", # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # Options Indexes FollowSymLinks MultiViews # # This controls which options the .htaccess files in directories can # override. Can also be "All", or any combination of "Options", "FileInfo", # "AuthConfig", and "Limit" # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # UserDir: The name of the directory which is appended onto a user's home # directory if a ~user request is received. # <IfModule mod_userdir.c> UserDir public_html </IfModule> # # Control access to UserDir directories. The following is an example # for a site where these directories are restricted to read-only. # #<Directory /home/*/public_html> # AllowOverride FileInfo AuthConfig Limit # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec # <Limit GET POST OPTIONS PROPFIND> # Order allow,deny # Allow from all # </Limit> # <LimitExcept GET POST OPTIONS PROPFIND> # Order deny,allow # Deny from all # </LimitExcept> #</Directory> # # DirectoryIndex: Name of the file or files to use as a pre-written HTML # directory index. Separate multiple entries with spaces. # <IfModule mod_dir.c> DirectoryIndex index.html </IfModule> # # AccessFileName: The name of the file to look for in each directory # for access control information. # AccessFileName .htaccess # # The following lines prevent .htaccess files from being viewed by # Web clients. Since .htaccess files often contain authorization # information, access is disallowed for security reasons. Comment # these lines out if you want Web visitors to see the contents of # .htaccess files. If you change the AccessFileName directive above, # be sure to make the corresponding changes here. # # Also, folks tend to use names such as .htpasswd for password # files, so this will protect those as well. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each # document that was negotiated on the basis of content. This asks proxy # servers not to cache the document. Uncommenting the following line disables # this behavior, and proxies will be allowed to cache the documents. # #CacheNegotiatedDocs # # UseCanonicalName: (new for 1.3) With this setting turned on, whenever # Apache needs to construct a self-referencing URL (a URL that refers back # to the server the response is coming from) it will use ServerName and # Port to form a "canonical" name. With this setting off, Apache will # use the hostname:port that the client supplied, when possible. This # also affects SERVER_NAME and SERVER_PORT in CGI scripts. # UseCanonicalName On # # TypesConfig describes where the mime.types file (or equivalent) is # to be found. # <IfModule mod_mime.c> TypesConfig /export/apps/apache/conf/mime.types </IfModule> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # mod_mime_magic is not part of the default server (you have to add # it yourself with a LoadModule [see the DSO paragraph in the 'Global # Environment' section], or recompile the server and include mod_mime_magic # as part of the configuration), so it's enclosed in an <IfModule> container. # This means that the MIMEMagicFile directive will only be processed if the # module is part of the server. # <IfModule mod_mime_magic.c> MIMEMagicFile /export/apps/apache/conf/magic </IfModule> # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /export/apps/apache/logs/error_log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog /export/apps/apache/logs/access_log common # # If you would like to have agent and referer logfiles, uncomment the # following directives. # #CustomLog /export/apps/apache/logs/referer_log referer #CustomLog /export/apps/apache/logs/agent_log agent # # If you prefer a single logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog /export/apps/apache/logs/access_log combined # # Optionally add a line containing the server version and virtual host # name to server-generated pages (error documents, FTP directory listings, # mod_status and mod_info output etc., but not CGI generated documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Aliases: Add here as many aliases as you need (with no limit). The format is # Alias fakename realname # <IfModule mod_alias.c> # # Note that if you include a trailing / on fakename then the server will # require it to be present in the URL. So "/icons" isn't aliased in this # example, only "/icons/".. # Alias /icons/ "/export/apps/apache/icons/" <Directory "/export/apps/apache/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the realname directory are treated as applications and # run by the server when requested rather than as documents sent to the client. # The same rules about trailing "/" apply to ScriptAlias directives as to # Alias. # ScriptAlias /cgi-bin/ "/export/apps/apache/cgi-bin/" # # "/export/apps/apache/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/export/apps/apache/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> </IfModule> # End of aliases. # # Redirect allows you to tell clients about documents which used to exist in # your server's namespace, but do not anymore. This allows you to tell the # clients where to look for the relocated document. # Format: Redirect old-URI new-URL # # # Directives controlling the display of server-generated directory listings. # <IfModule mod_autoindex.c> # # FancyIndexing is whether you want fancy directory indexing or standard # IndexOptions FancyIndexing # # AddIcon* directives tell the server which icon to show for different # files or filename extensions. These are only displayed for # FancyIndexed directories. # AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif # # AddDescription allows you to place a short description after a file in # server-generated indexes. These are only displayed for FancyIndexed # directories. # Format: AddDescription "description" filename # #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz # # ReadmeName is the name of the README file the server will look for by # default, and append to directory listings. # # HeaderName is the name of a file which should be prepended to # directory indexes. # # If MultiViews are amongst the Options in effect, the server will # first look for name.html and include it if found. If name.html # doesn't exist, the server will then look for name.txt and include # it as plaintext if found. # ReadmeName README HeaderName HEADER # # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. # IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t </IfModule> # End of indexing directives. # # Document types. # <IfModule mod_mime.c> # # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress # information on the fly. Note: Not all browsers support this. # Despite the name similarity, the following Add* directives have nothing # to do with the FancyIndexing customization directives above. # AddEncoding x-compress Z AddEncoding x-gzip gz tgz # # AddLanguage allows you to specify the language of a document. You can # then use content negotiation to give a browser a file in a language # it can understand. # # Note 1: The suffix does not have to be the same as the language # keyword --- those with documents in Polish (whose net-standard # language code is pl) may wish to use "AddLanguage pl .po" to # avoid the ambiguity with the common suffix for perl scripts. # # Note 2: The example entries below illustrate that in quite # some cases the two character 'Language' abbriviation is not # identical to the two character 'Country' code for its country, # E.g. 'Danmark/dk' versus 'Danish/da'. # # Note 3: In the case of 'ltz' we violate the RFC by using a three char # specifier. But there is 'work in progress' to fix this and get # the reference data for rfc1766 cleaned up. # # Danish (da) - Dutch (nl) - English (en) - Estonian (ee) # French (fr) - German (de) - Greek-Modern (el) # Italian (it) - Portugese (pt) - Luxembourgeois* (ltz) # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz) # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) # AddLanguage da .dk AddLanguage nl .nl AddLanguage en .en AddLanguage et .ee AddLanguage fr .fr AddLanguage de .de AddLanguage el .el AddLanguage it .it AddLanguage ja .ja AddCharset ISO-2022-JP .jis AddLanguage pl .po AddCharset ISO-8859-2 .iso-pl AddLanguage pt .pt AddLanguage pt-br .pt-br AddLanguage ltz .lu AddLanguage ca .ca AddLanguage es .es AddLanguage sv .se AddLanguage cz .cz # LanguagePriority allows you to give precedence to some languages # in case of a tie during content negotiation. # # Just list the languages in decreasing order of preference. We have # more or less alphabetized them here. You probably want to change this. # <IfModule mod_negotiation.c> LanguagePriority en da nl et fr de el it ja pl pt pt-br ltz ca es sv </IfModule> # # AddType allows you to tweak mime.types without actually editing it, or to # make certain files to be certain types. # # For example, the PHP 3.x module (not part of the Apache distribution - see # http://www.php.net) will typically use: # #AddType application/x-httpd-php3 .php3 #AddType application/x-httpd-php3-source .phps # # And for PHP 4.x, use: # #AddType application/x-httpd-php .php #AddType application/x-httpd-php-source .phps AddType application/x-tar .tgz # # AddHandler allows you to map certain file extensions to "handlers", # actions unrelated to filetype. These can be either built into the server # or added with the Action command (see below) # # If you want to use server side includes, or CGI outside # ScriptAliased directories, uncomment the following lines. # # To use CGI scripts: # #AddHandler cgi-script .cgi # # To use server-parsed HTML files # #AddType text/html .shtml #AddHandler server-parsed .shtml # # Uncomment the following line to enable Apache's send-asis HTTP file # feature # #AddHandler send-as-is asis # # If you wish to use server-parsed imagemap files, use # #AddHandler imap-file map # # To enable type maps, you might want to use # #AddHandler type-map var </IfModule> # End of document types. # # Action lets you define media types that will execute a script whenever # a matching file is called. This eliminates the need for repeated URL # pathnames for oft-used CGI file processors. # Format: Action media/type /cgi-script/location # Format: Action handler-name /cgi-script/location # # # MetaDir: specifies the name of the directory in which Apache can find # meta information files. These files contain additional HTTP headers # to include when sending the document # #MetaDir .web # # MetaSuffix: specifies the file name suffix for the file containing the # meta information. # #MetaSuffix .meta # # Customizable error response (Apache style) # these come in three flavors # # 1) plain text #ErrorDocument 500 "The server made a boo boo. # n.b. the (") marks it as text, it does not get output # # 2) local redirects #ErrorDocument 404 /missing.html # to redirect to local URL /missing.html #ErrorDocument 404 /cgi-bin/missing_handler.pl # N.B.: You can redirect to a script or a document using server-side-includes. # # 3) external redirects #ErrorDocument 402 http://some.other_server.com/subscription_info.html # N.B.: Many of the environment variables associated with the original # request will *not* be available to such a script. # # Customize behaviour based on the browser # <IfModule mod_setenvif.c> # # The following directives modify normal HTTP response behavior. # The first directive disables keepalive for Netscape 2.x and browsers that # spoof it. There are known problems with these browser implementations. # The second directive is for Microsoft Internet Explorer 4.0b2 # which has a broken HTTP/1.1 implementation and does not properly # support keepalive when it is used on 301 or 302 (redirect) responses. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 # # The following directive disables HTTP/1.1 responses to browsers which # are in violation of the HTTP/1.0 spec by not being able to grok a # basic 1.1 response. # BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 </IfModule> # # Allow server status reports, with the URL of http://servername/server-status # Change the ".your_domain.com" to match your domain to enable. # <Location /server-status> SetHandler server-status Order deny,allow Deny from all Allow from 48.138.128.126 Allow from 48.10.112.27 </Location> # # Allow remote server configuration reports, with the URL of # http://servername/server-info (requires that mod_info.c be loaded). # Change the ".your_domain.com" to match your domain to enable. # <Location /server-info> SetHandler server-info Order deny,allow Deny from all Allow from 48.138.128.126 Allow from 48.10.112.27 </Location> # # There have been reports of people trying to abuse an old bug from pre-1.1 # days. This bug involved a CGI script distributed as a part of Apache. # By uncommenting these lines you can redirect these attacks to a logging # script on phf.apache.org. Or, you can record them yourself, using the script # support/phf_abuse_log.cgi. # #<Location /cgi-bin/phf*> # Deny from all # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi #</Location> # # Proxy Server directives. Uncomment the following lines to # enable the proxy server: # #<IfModule mod_proxy.c> #ProxyRequests On # #<Directory proxy:*> # Order deny,allow # Deny from all # Allow from .your_domain.com #</Directory> # # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block # #ProxyVia On # # To enable the cache as well, edit and uncomment the following lines: # (no cacheing without CacheRoot) # #CacheRoot "/export/apps/apache/proxy" #CacheSize 5 #CacheGcInterval 4 #CacheMaxExpire 24 #CacheLastModifiedFactor 0.1 #CacheDefaultExpire 1 #NoCache a_domain.com another_domain.edu joes.garage_sale.com #</IfModule> # End of proxy directives. ### Section 3: Virtual Hosts # # VirtualHost: If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/> # for further details before you try to setup virtual hosts. # You may use the command line option '-S' to verify your virtual host # configuration. # # If you want to use name-based virtual hosts you need to define at # least one IP address (and port number) for them. # #NameVirtualHost 12.34.56.78:80 #NameVirtualHost 12.34.56.78 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # #<VirtualHost ip.address.of.host.some_domain.com> # ServerAdmin [EMAIL PROTECTED] # DocumentRoot /www/docs/host.some_domain.com # ServerName host.some_domain.com # ErrorLog logs/host.some_domain.com-error_log # CustomLog logs/host.some_domain.com-access_log common #</VirtualHost> #<VirtualHost _default_:*> #</VirtualHost> Include /export/apps/apache/conf/jserv/jserv.conf ############################################################################### # Apache JServ Configuration File # ############################################################################### # Note: this file should be appended or included into your httpd.conf # Tell Apache on win32 to load the Apache JServ communication module #LoadModule jserv_module modules/ApacheModuleJServ.dll # Tell Apache on Unix to load the Apache JServ communication module # For shared object builds only!!! LoadModule jserv_module /export/apps/apache/libexec/mod_jserv.so <IfModule mod_jserv.c> # Whether Apache must start Apache JServ or not (On=Manual Off=Autostart) # Syntax: ApJServManual [on/off] # Default: "Off" ApJServManual Off # Properties filename for Apache JServ in Automatic Mode. # In manual mode this directive is ignored # Syntax: ApJServProperties [filename] # Default: "./conf/jserv.properties" ApJServProperties /export/apps/apache/conf/jserv/jserv.properties # Log file for this module operation relative to Apache root directory. # Set the name of the trace/log file. To avoid possible confusion about # the location of this file, an absolute pathname is recommended. # # This log file is different than the log file that is in the # jserv.properties file. This is the log file for the C portion of Apache # JServ. # # On Unix, this file must have write permissions by the owner of the JVM # process. In other words, if you are running Apache JServ in manual mode # and Apache is running as user nobody, then the file must have its # permissions set so that that user can write to it. # Syntax: ApJServLogFile [filename] # Default: "./logs/mod_jserv.log" # Note: when set to "DISABLED", the log will be redirected to Apache error log ApJServLogFile /export/apps/apache/logs/mod_jserv.log # Log Level for this module # Syntax: ApJServLogLevel [debug|info|notice|warn|error|crit|alert|emerg] # Default: info (unless compiled w/ JSERV_DEBUG, in which case it's debug) ApJServLogLevel notice # Protocol used by this host to connect to Apache JServ # (see documentation for more details on available protocols) # Syntax: ApJServDefaultProtocol [name] # Default: "ajpv12" ApJServDefaultProtocol ajpv12 # Default host on which Apache JServ is running # Syntax: ApJServDefaultHost [hostname] # Default: "localhost" ApJServDefaultHost localhost # Default port that Apache JServ is listening to # Syntax: ApJServDefaultPort [number] # Default: protocol-dependant (for ajpv12 protocol this is "8007") ApJServDefaultPort 8007 # The amount of time to give to the JVM to start up as well # as the amount of time to wait to ping the JVM to see if it # is alive. Slow or heavily loaded machines might want to # increase this value. # Default: 10 seconds # ApJServVMTimeout 10 # Passes parameter and value to specified protocol. # Syntax: ApJServProtocolParameter [name] [parameter] [value] # Default: NONE # Note: Currently no protocols handle this. Introduced for future protocols. # Apache JServ secret key file relative to Apache root directory. # Syntax: ApJServSecretKey [filename] # Default: "./conf/jserv.secret.key" # Warning: if authentication is DISABLED, everyone on this machine (not just # this module) may connect to your servlet engine and execute servlet # bypassing web server restrictions. See the documentation for more information #ApJServSecretKey /export/apps/apache/conf/jserv/jserv.secret.key ApJServSecretKey DISABLED # Mount point for Servlet zones # (see documentation for more information on servlet zones) # Syntax: ApJServMount [name] [jserv-url] # Default: NONE # Note: [name] is the name of the Apache URI path to mount jserv-url on # [jserv-url] is something like "protocol://host:port/zone" # If protocol, host or port are not specified, the values from # "ApJServDefaultProtocol", "ApJServDefaultHost" or "ApJServDefaultPort" # will be used. # If zone is not specified, the zone name will be the first subdirectory of # the called servlet. # Example: "ApJServMount /servlets /myServlets" # if user requests "http://host/servlets/TestServlet" # the servlet "TestServlet" in zone "myServlets" on default host # thru default protocol on defaul port will be requested # Example: "ApJServMount /servlets ajpv12://localhost:8007" # if user requests "http://host/servlets/myServlets/TestServlet" # the servlet "TestServlet" in zone "myServlets" will be requested # Example: "ApJServMount /servlets ajpv12://jserv.mydomain.com:15643/myServlets" # if user requests "http://host/servlets/TestServlet" the servlet # "TestServlet" in zone "myServlets" on host "jserv.mydomain.com" using # "ajpv12" protocol on port "15643" will be executed ApJServMount /servlets /root ApJServMount /servlet /root # Whether <VirtualHost> inherits base host mount points or not # Syntax: ApJServMountCopy [on/off] # Default: "On" # Note: This directive is meaninful only when virtual hosts are being used ApJServMountCopy on # Executes a servlet passing filename with proper extension in PATH_TRANSLATED # property of servlet request. # Syntax: ApJServAction [extension] [servlet-uri] # Defaults: NONE # Notes: This is used for external tools. #ApJServAction .jsp /servlets/org.gjt.jsp.JSPServlet #ApJServAction .gsp /servlets/com.bitmechanic.gsp.GspServlet #ApJServAction .jhtml /servlets/org.apache.servlet.ssi.SSI #ApJServAction .xml /servlets/org.apache.cocoon.Cocoon # Enable the Apache JServ status handler with the URL of # "http://servername/jserv/" (note the trailing slash!) # Change the "deny" directive to restrict access to this status page. <Location /jserv/> SetHandler jserv-status order deny,allow deny from all allow from localhost allow from 48.10.112.27 allow from 48.138.128.126 </Location> ############################## W A R N I N G ################################## # Remember to disable or otherwise protect the execution of the Apache JServ # # Status Handler (see right above) on a production environment since this may # # give untrusted users the ability to obtain restricted information on your # # servlets and their initialization arguments such as JDBC passwords and # # other important information. The Apache JServ Status Handler should be # # accessible only by system administrators. # ############################################################################### </IfModule> ############################################################################### # Apache JServ Configuration File # ############################################################################### ################################ W A R N I N G ################################ # Unlike normal Java properties, JServ configurations have some important # extentions: # # 1) commas are used as token separators # 2) multiple definitions of the same key are concatenated in a # comma-separated list. ############################################################################### # # Execution parameters ####################### # The Java Virtual Machine interpreter. # Syntax: wrapper.bin=[filename] (String) # Note: specify a full path if the interpreter is not visible in your path. wrapper.bin=/usr/java1.1/bin/java # Arguments passed to Java interpreter (optional) # Syntax: wrapper.bin.parameters=[parameters] (String) # Default: NONE # Apache JServ entry point class (should not be changed) # Syntax: wrapper.class=[classname] (String) # Default: "org.apache.jserv.JServ" # Arguments passed to main class after the properties filename (not used) # Syntax: wrapper.class.parameters=[parameters] (String) # Default: NONE # Note: currently not used # PATH environment value passed to the JVM # Syntax: wrapper.path=[path] (String) # Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems # "c:\(windows-dir);c:\(windows-system-dir)" for Win32 systems # Notes: if more than one line is supplied these will be concatenated using # ":" or ";" (depending wether Unix or Win32) characters # Under Win32 (windows-dir) and (windows-system-dir) will be # automatically evaluated to match your system requirements # CLASSPATH environment value passed to the JVM # Syntax: wrapper.classpath=[path] (String) # Default: NONE (Sun's JDK/JRE already have a default classpath) # Note: if more than one line is supplied these will be concatenated using # ":" or ";" (depending wether Unix or Win32) characters. JVM must be # able to find JSDK and JServ classes and any utility classes used by # your servlets. # Note: the classes you want to be automatically reloaded upon modification # MUST NOT be in this classpath or the classpath of the shell # you start the Apache from. # wrapper.classpath=/export/apps/apache/libexec/ApacheJServ.jar wrapper.classpath=/export/apps/apache/JSDK2.0/lib/jsdk.jar #wrapper.classpath=/usr/java1.1/lib/classes.zip #wrapper.classpath=/export/apps/apache/servlets/common.jar #wrapper.classpath=/export/apps/apache/servlets/html.jar wrapper.classpath=/export/apps/apache/common.jar wrapper.classpath=/export/apps/apache/html.jar wrapper.classpath=/export/apps/JavaUtils/jdbc/informix1.5/ifxjdbc.jar #wrapper.classpath=/usr/java1.1/lib/rt.jar # An environment name with value passed to the JVM # Syntax: wrapper.env=[name]=[value] (String) # Default: NONE on Unix Systems # SystemDrive and SystemRoot with appropriate values on Win32 systems # An environment name with value copied from caller to Java Virtual Machine # Syntax: wrapper.env.copy=[name] (String) # Default: NONE # Copies all environment from caller to Java Virtual Machine # Syntax: wrapper.env.copyall=[true|false] (boolean) # Default: false # Protocol used for signal handling # Syntax: wrapper.protocol=[name] (String) # Default: ajpv12 # # General parameters ###################### # Set the default IP address or hostname Apache JServ binds (or listens) to. # # If you have a machine with multiple IP addresses, this address # will be the one used. If you set the value to localhost, it # will be resolved to the IP address configured for the locahost # on your system (generally this is 127.0.0.1). This feature is so # that one can have multiple instances of Apache JServ listening on # the same port number, but different IP addresses on the same machine. # Use bindaddress=* only if you know exactly what you are doing here, # as it could let JServ wide open to the internet. # You must understand that JServ has to answer only to Apache, and should not # be reachable by nobody but mod_jserv. So localhost is usually a # good option. The second best choice would be an internal network address # (protected by a firewall) if JServ is running on another machine than Apache. # Ask your network admin. # "*" _may_ be used on boxes where some of the clients get connected using # "localhost"and others using another IP addr. # # Syntax: bindaddress=[ipaddress] or [localhost] or [*] # Default: localhost bindaddress=localhost # Set the port Apache JServ listens to. # Syntax: port=[1024,65535] (int) # Default: 8007 port=8007 # # Servlet Zones parameters ########################### # List of servlet zones Apache JServ manages # Syntax: zones=[servlet zone],[servlet zone]... (Comma separated list of String) # Default: NONE zones=root # Configuration file for each servlet zone (one per servlet zone) # Syntax: [servlet zone name as on the zones list].properties=[full path to configFile] (String) # Default: NONE # Note: if the file could not be opened, try using absolute paths. root.properties=/export/apps/apache/conf/jserv/zone.properties # # Thread Pool parameters ######################### # Enables or disables the use of the thread pool. # Syntax: pool=[true|false] (boolean) # Default: false # WARNING: the pool has not been extensively tested and may generate deadlocks. # For this reason, we advise against using this code in production environments. pool=false # Indicates the number of idle threads that the pool may contain. # Syntax: pool.capacity=(int)>0 # Default: 10 # NOTE: depending on your system load, this number should be low for contantly # loaded servers and should be increased depending on load bursts. pool.capacity=10 # Indicates the pool controller that should be used to control the # level of the recycled threads. # Syntax: pool.controller=[full class of controller] (String) # Default: org.apache.java.recycle.DefaultController # NOTE: it is safe to leave this unchanged unless special recycle behavior # is needed. Look at the "org.apache.java.recycle" package javadocs for more # info on other pool controllers and their behavior. pool.controller=org.apache.java.recycle.DefaultController # # Security parameters ##################### # Enable/disable the execution of org.apache.jserv.JServ as a servlet. # This is disabled by default because it may give informations that should # be restricted. # Note that the execution of Apache JServ as a servlet is filtered by the web # server modules by default so that both sides should be enabled to let this # service work. # This service is useful for installation and configuration since it gives # feedback about the exact configurations Apache JServ is using, but it should # be disabled when both installation and configuration processes are done. # Syntax: security.selfservlet=[true|false] (boolean) # Default: false # WARNING: disable this in a production environment since may give reserved # information to untrusted users. security.selfservlet=true # Set the maximum number of socket connections Apache JServ may handle # simultaneously. Make sure your operating environment has enough file # descriptors to allow this number. # Syntax: security.maxConnections=(int)>1 # Default: 50 security.maxConnections=50 # Backlog setting for very fine performance tunning of JServ. # Unless you are familiar to sockets leave this value commented out. # security.backlog=5 # List of IP addresses allowed to connect to Apache JServ. This is a first # security filtering to reject possibly unsecure connections and avoid the # overhead of connection authentication. # <warning> # (please don't use the following one unless you know what you are doing : # security.allowedAddresses=DISABLED # allows connections on JServ'port from entire internet.) # You do need only to allow YOUR Apache to talk to JServ. # </warning> # # Default: 127.0.0.1 # Syntax: security.allowedAddresses=[IP address],[IP Address]... (Comma separated list of IP addresses) security.allowedAddresses=127.0.0.1 # Enable/disable connection authentication. # NOTE: unauthenticated connections are a little faster since authentication # handshake is not performed at connection creation. # WARNING: authentication is disabled by default because we believe that # connection restriction from all IP addresses but localhost reduces your # time to get Apache JServ to run. If you allow other addresses to connect and # you don't trust it, you should enable authentication to prevent untrusted # execution of your servlets. Beware: if authentication is disabled and the # IP address is allowed, everyone on that machine can execute your servlets! # Syntax: security.authentication=[true,false] (boolean) # Default: true security.authentication=false # Authentication secret key. # The secret key is passed as a file that must be kept secure and must # be exactly the same of those used by clients to authenticate themselves. # Syntax: security.secretKey=[secret key path and filename] (String) # Default: NONE # Note: if the file could not be opened, try using absolute paths. #security.secretKey=/export/apps/apache/conf/jserv/jserv.secret.key # Length of the randomly generated challenge string (in bytes) used to # authenticate connections. 5 is the lowest possible choice to force a safe # level of security and reduce connection creation overhead. # Syntax: security.challengeSize=(int)>5 # Default: 5 #security.challengeSize=5 # # Logging parameters #################### # Enable/disable Apache JServ logging. # WARNING: logging is a very expensive operation in terms of performance. You # should reduced the generated log to a minumum or even disable it if fast # execution is an issue. Note that if all log channels (see below) are # enabled, the log may become really big since each servlet request may # generate many Kb of log. Some log channels are mainly for debugging # purposes and should be disabled in a production environment. # Syntax: log=[true,false] (boolean) # Default: true log=true # Set the name of the trace/log file. To avoid possible confusion about # the location of this file, an absolute pathname is recommended. # # This log file is different than the log file that is in the # jserv.conf file. This is the log file for the Java portion of Apache # JServ. # # On Unix, this file must have write permissions by the owner of the JVM # process. In other words, if you are running Apache JServ in manual mode # and Apache is running as user nobody, then the file must have its # permissions set so that that user can write to it. # Syntax: log.file=[log path and filename] (String) # Default: NONE # Note: if the file could not be opened, try using absolute paths. log.file=/export/apps/apache/logs/jserv.log # Enable the timestamp before the log message # Syntax: log.timestamp=[true,false] (boolean) # Default: true log.timestamp=true # Use the given string as a data format # (see java.text.SimpleDateFormat for the list of options) # Syntax: log.dateFormat=(String) # Default: [dd/MM/yyyy HH:mm:ss:SSS zz] log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz] # Since all the messages logged are processed by a thread running with # minimum priority, it's of vital importance that this thread gets a chance # to run once in a while. If it doesn't, the log queue overflow occurs, # usually resulting in the OutOfMemoryError. # # To prevent this from happening, two parameters are used: log.queue.maxage # and log.queue.maxsize. The former defines the maximum time for the logged # message to stay in the queue, the latter defines maximum number of # messages in the queue. # # If one of those conditions becomes true (age > maxage || size > maxsize), # the log message stating that fact is generated and the log queue is # flushed in the separate thread. # # If you ever see such a message, either your system doesn't live up to its # expectations or you have a runaway loop (probably, but not necessarily, # generating a lot of log messages). # # WARNING: Default values are lousy, you probably want to tweak them and # report the results back to the development team. # Syntax: log.queue.maxage = [milliseconds] # Default: 5000 log.queue.maxage = 5000 # Syntax: log.queue.maxsize = [integer] # Default: 1000 log.queue.maxsize = 1000 # Enable/disable logging the channel name # Default: false # log.channel=false # Enable/disable channels, each logging different actions. # Syntax: log.channel.[channel name]=[true,false] (boolean) # Default: false # Info channel - quite a lot of informational messages # hopefully you don't need them under normal circumstances # log.channel.info=true # Servlets exception, i.e. exception caught during # servlet.service() processing are monitored here # you probably want to have this one switched on log.channel.servletException=true # JServ exception, caught internally in jserv # we suggest to leave it on log.channel.jservException=true # Warning channel, it catches all the important # messages that don't cause JServ to stop, leave it on log.channel.warning=true # Servlet log # All messages logged by servlets. Probably you want # this one to be switched on. log.channel.servletLog=true # Critical errors # Messages produced by critical events causing jserv to stop log.channel.critical=true # Debug channel # Only for internal debugging purposes # log.channel.debug=true ############################################################################### # Servlet Zone Configuration File # ############################################################################### ################################ W A R N I N G ################################ # # Unlike normal Java properties, JServ configurations have some important # extentions: # # 1) commas are used as token separators # 2) multiple definitions of the same key are concatenated in a # comma-separated list. # ############################################################################### # List of Repositories ####################### # The list of servlet repositories controlled by this servlet zone # Syntax: repositories=[repository],[repository]... # Default: NONE # Note: The classes you want to be reloaded upon modification should be put # here. repositories=/export/apps/apache/servlets # Classloader parameters ######################### # Enable servlet class autoreloading. # Syntax: autoreload.classes=[true,false] (boolean) # Default: true autoreload.classes=true # Enable servlet resourced autoreloading (properties and other loaded resources) # Syntax: autoreload.file=[true,false] (boolean) # Default: true autoreload.file=true # Set the number of millisecond to wait before giving up on initializing a servlet. # (a timeout of zero means no timeout) # Syntax: init.timeout=(long)>0 # Default: 10000 (10 secs) init.timeout=10000 # Set the number of millisecond to wait before giving up on destroying a servlet. # (a timeout of zero means no timeout) # Syntax: destroy.timeout=(long)>0 # Default: 10000 (10 secs) destroy.timeout=10000 # Set whether or not to use cookies to maintain session state. # If false, then response.encodeUrl() will always be the method # to maintain session state. If true, then the servlet engine will # attempt to set a cookie when request.getSession(true) is called. # Syntax: session.useCookies=[true,false] (boolean) # Default: true session.useCookies=true # Set the number of millisecond to wait before invalidating an unused session. # Syntax: session.timeout=(long)>0 # Default: 1800000 (30 mins) session.timeout=1800000 # Set how frequently (milliseconds) to check for timed-out sessions. # Syntax: session.checkFrequency=(long)>0 # Default: 30000 (30 secs) session.checkFrequency=30000 # SingleThreadModel Servlets parameters ######################################## # Set the initial capacity of the STM servlets pool. # Syntax: singleThreadModelServlet.initialCapacity=(int)>1 # Default: 5 singleThreadModelServlet.initialCapacity=5 # Set the number of servlet instances should be added to the pool if found empty. # Syntax: singleThreadModelServlet.incrementCapacity=(int)>1 # Default: 5 singleThreadModelServlet.incrementCapacity=5 # Set the maximum capacity of the STM pool # Syntax: singleThreadModelServlet.maximumCapacity=(int)>1 # Default: 10 singleThreadModelServlet.maximumCapacity=10 ################### S E R V L E T P A R A M E T E R S ###################### ################################## N O T E #################################### # When "classname" is specified, it means a Java dot-formatter full class name # without the ".class". For example, a class with source file named # "Dummy.java" with a package name "org.fool" is defined as "org.fool.Dummy". # # Since each servlet may have lots of private initialization data, Apache JServ # allows you to store those servlet initArgs in a separate file. To do this, # simply do not set any initArgs in this file: Apache JServ will then look for # a file named "[servlet classname].initargs" in the same directory of that # class. Note that this may work with even class archives. ############################################################################### # Startup Servlets ################### # Comma or space delimited list of servlets to launch on startup. # This can either be a class name or alias. # Syntax: servlets.startup=[classname or alias],[classname or alias],... # Default: NONE # servlets.startup=hello,snoop,org.fool.Dummy # Servlet Aliases ################## # This defines aliases from which servlets can be invoked. # Each alias give a new instance of the servlet. This means that if a servlet # is invoked both by class name and by alias name, it will result in _TWO_ # instances of the servlet being created. # Syntax: servlet.[alias].code=[classname] (String) # Default: NONE # servlet.snoop.code=SnoopServlet # servlet.hello.code=org.fool.Dummy # Global Init Parameters ######################### # Parameters passed here are given to each of servlets. You should put # configuration information that is common to all servlets. # # The value of the property is a comma delimited list of "name=value" pairs # that are accessible to the servlet via the method getInitParameter() # in ServletConfig. # Syntax: servlets.default.initArgs=[name]=[value],[name]=[value],... # Default: NONE # servlets.default.initArgs=common.to.everybody=Hi everybody! # Servlet Init Parameters ########################## # These properties define init parameters for each servlet that is invoked # by its classname. # Syntax: servlet.[classname].initArgs=[name]=[value],[name]=[value],... # Default: NONE # servlet.org.fool.Dummy.initArgs=message=I'm a dummy servlet # Aliased Servlet Init Parameters ################################## # These properties define init parameters for each servlet that is invoked # by its alias. # Syntax: servlet.[alias].initArgs=[name]=[value],[name]=[value],... # Default: NONE # servlet.snoop.initArgs=message=I'm a snoop servlet # servlet.hello.initArgs=message=I say hello world to everyone -- -------------------------------------------------------------- Please read the FAQ! <http://java.apache.org/faq/> To subscribe: [EMAIL PROTECTED] To unsubscribe: [EMAIL PROTECTED] Archives and Other: <http://java.apache.org/main/mail.html> Problems?: [EMAIL PROTECTED]
