Right, I don't see memory leak any more on the iso pipe and it's running quite fast: 970-980 fps !!
After running it for a while I got USB errors -19 "Device removed or no such device". The device was still showing up in /proc/bus/usb/001 and the program ran ok after a restart (I didn't cycle USB cable or power to the device, just restarted the program). I'll add some intensive work on the the controil pipe and will run it more. Adding second iso pipe for audio will be next. ----- Original Message ----- From: "Dan Streetman" <[EMAIL PROTECTED]> To: "Boris Dainson" <[EMAIL PROTECTED]> Cc: "javax.usb devel" <[EMAIL PROTECTED]> Sent: Thursday, November 07, 2002 1:36 PM Subject: Re: mem leak > > I've been running a test using Requests (DCP only) and there is no leak > after 2 hours, so I think that was the only leak. I didn't check pipes, > but I suspect they are ok too (the leak was in a common place). > > > On Thu, 7 Nov 2002, Dan Streetman wrote: > > > > >as I suspected, I checked the Linux imp and I was forgetting to remove > >each packet from a in-progress list in the proxy class. I just removed > >the in-progress list, since it's not really needed anymore in the new > >implementation. > > > >Try pulling the 0.9 linux imp from CVS, and see if the leak is gone now. > > > > > > > > -- > Dan Streetman > [EMAIL PROTECTED] > --------------------- > 186,272 miles per second: > It isn't just a good idea, it's the law! > > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ javax-usb-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/javax-usb-devel
